Models > 11058683

11058683 Kenmore Washer - Overview

Sections of the 11058683

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Hose Clamp – Part Number: WP596669
Hose Clamp
★★★★★
★★★★★
(1)
PartSelect #: PS11743008
Manufacturer #: WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This ...
$11.80
  In Stock
Order within the next 1 hr and 49 mins and your part ships today!
Inlet Hose - 5 FT – Part Number: WP89503
Inlet Hose - 5 FT
★★★★★
★★★★★
(3)
PartSelect #: PS11746820
Manufacturer #: WP89503
This hose can handle hot or cold water and is five feet long.
$21.53
  In Stock
Order within the next 1 hr and 49 mins and your part ships today!
Water Inlet Hose Washer – Part Number: WP16123
Water Inlet Hose Washer
★★★★★
★★★★★
(2)
PartSelect #: PS11738697
Manufacturer #: WP16123
If your clothes washer is leaking, it is likely that there could be an issue with one of the hoses. If the hoses are in working order, you should check the washers connecting the hose to your unit. Ru...
$7.95
  In Stock
Order within the next 1 hr and 49 mins and your part ships today!
Screw – Part Number: WP681414
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS11743744
Manufacturer #: WP681414
This screw is sold individually.
$7.76
  In Stock
Order within the next 1 hr and 49 mins and your part ships today!
Water Inlet Valve – Part Number: 358277
Water Inlet Valve
★★★★★
★★★★★
(1)
PartSelect #: PS348482
Manufacturer #: 358277
This valve has two ports for water to enter. This valve is compatible with a half inch ID hose and it has two 3/4-11x1/2 NHT hose threads.
$93.67
  In Stock
Order within the next 1 hr and 49 mins and your part ships today!
Hose Washer  Kit – Part Number: 285452A
Hose Washer Kit
PartSelect #: PS1803069
Manufacturer #: 285452A
Washer fill hose gasket and screen. This is a set of 4.
$8.28
  In Stock
Order within the next 1 hr and 49 mins and your part ships today!
8-18 X .625 TR CR AB – Part Number: W11693756
8-18 X .625 TR CR AB
PartSelect #: PS17216882
Manufacturer #: W11693756
Sold individually.
$10.94
  In Stock
Order within the next 1 hr and 49 mins and your part ships today!
CLIP – Part Number: 279255
CLIP
PartSelect #: PS334169
Manufacturer #: 279255
  No Longer Available
WIRE CLAMP – Part Number: 596171
WIRE CLAMP
PartSelect #: PS380149
Manufacturer #: 596171
  No Longer Available
SWITCH, WATER TERMPERATURE – Part Number: 367305
SWITCH, WATER TERMPERATURE
PartSelect #: PS874281
Manufacturer #: 367305
  No Longer Available
Washer – Part Number: 90918
Washer
PartSelect #: PS609476
Manufacturer #: 90918
  No Longer Available
No Longer Available – Part Number: NLA
No Longer Available
PartSelect #: PS558193
Manufacturer #: NLA
This part is discontinued from the manufacturer and is no longer available to purchase.
  No Longer Available

Questions And Answers for 11058683

Be the first to ask our experts a question about this model!

Common Symptoms of the 11058683

[Viewing 2 of 2]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
No hot or cold water
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replacement of the water inlet vaqlve
First I disconnected the inlet hoses. After lifting up the cover the electrical wires were marked and disconnected from the old valve. Next the short hose from the old valve to the tub was removed. Then the old valve was removed from the washing machine by removal of two mounting screws. The new valve was installed in the reverse order. New hose clamps were installed on the short hose from the valve to the tub. New washers were installed on the hoses which connected to the valve. A test was made to check for any leaks.
Parts Used:
Water Inlet Valve
  • William from Chester, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
11 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loss of cold water
Removed the top latches with a nut driver. Removed the washing machine top. Used a nut driver to remove the valve. Used pliers to remove and replace the outlet hose clamp. Used pliers to remove and replace inlet hoses.

I have kept this washer and dryer running for 27 years now by replacing parts. I was going to replace them this time but for a $20 part they still run ok. I bet I can use the old valve for a garden irrigation project too !
Parts Used:
Water Inlet Valve
  • David from Powell, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking water inlet hoses.
Removed the old hoses and screwed on the new hoses.
Parts Used:
Inlet Hose - 5 FT
  • Helen from NASHUA, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!