11058683 Kenmore Washer - Overview

Diagrams for 11058683

See every part. Know exactly what you need.

CONV FROM PORT WATER FILL TO REG WATER FILL

Parts for the 11058683

$7.47

Washer Hose Clamp

★★★★★

(1)

Part #WP596669

This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on th...Read more

Read less

$19.30

Inlet Hose - 5 FT

★★★★★

(4)

Part #WP89503

This hose can handle hot or cold water and is five feet long.

$7.47

Water Inlet Hose Washer

★★★★★

(2)

Part #WP16123

If your clothes washer is leaking, it is likely that there could be an issue with one of the hoses. If the hoses are in working order, you should check the washers connecting the hose to your unit. Rubber washers are tasked with enhancing the seal between the hose and washer. A faulty or damaged washer will not be able to perform this pro...Read more

Read less

$7.47

Dryer Screw

★★★★★

(1)

Part #WP681414

This screw is sold individually.

Water Inlet Valve

★★★★★

(1)

Part #358277

This valve has two ports for water to enter. This valve is compatible with a half inch ID hose and it has two 3/4-11x1/2 NHT hose threads.

$7.47

Hose Washer Kit

Part #285452A

Washer fill hose gasket and screen. This is a set of 4.

$18.22

8-18 X .625 TR CR AB

Part #W11693756

Sold individually.

CLIP

Part #279255

WIRE CLAMP

Part #596171

SWITCH, WATER TERMPERATURE

Part #367305

No Longer Available

Part #NLA

This part is discontinued from the manufacturer and is no longer available to purchase.

Washer

Part #90918

Common Symptoms of the 11058683

How this model fails, and the parts that fix it.

Leaking

Fixed by
these parts

Videos related to models starting with 11058683

Watch our pros, then fix it yourself.

Replacing the Washer Hose Clamp

Replacing the Inlet Hose - 5 FT

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Replacement of the water inlet vaqlve

11 of 14 people found this instruction helpful.

William from Chester, NJ
Easy
15 - 30 mins
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)

First I disconnected the inlet hoses. After lifting up the cover the electrical wires were marked and disconnected from the old valve. Next the short hose from the old valve to the tub was removed. Then the old valve was removed from the washing machine by removal of two mounting screws. The new valve was installed in the reverse orde ... Read more

Read less

Was this helpful?

Loss of cold water

8 of 10 people found this instruction helpful.

David from Powell, OH
Easy
30 - 60 mins
Nutdriver, Pliers

Removed the top latches with a nut driver. Removed the washing machine top. Used a nut driver to remove the valve. Used pliers to remove and replace the outlet hose clamp. Used pliers to remove and replace inlet hoses.

I have kept this washer and dryer running for 27 years now by replacing parts. I was going to replace them thi ... Read more

Read less

Was this helpful?

Leaking water inlet hoses.

4 of 6 people found this instruction helpful.

Helen from NASHUA, NH
Really Easy
30 - 60 mins

Removed the old hoses and screwed on the new hoses.

Was this helpful?