EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

11028132411 Kenmore Washer - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Water Inlet Valve – Part Number: W11165546
$69.91
In Stock
Water Inlet Valve
★★★★★
★★★★★
(35)
Part #W11165546
This is an inlet valve for your washing machine. The inlet valve is an electrically controlled valve with a solenoid that opens and closes as needed, during the water filling cycle of the washing machine. This inlet valve features two inlets, one for hot and one for cold water, and three push-on valves that connect within your washing machine. If your washer is having issues filling or is leaking water from the area of the inlet valve, it needs to be replaced immediately. Replacing this valve will require a screwdriver and a wrench to replace. This inlet valve is an OEM part and is sold individually.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(7)
Part #72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
Washer D-Shaped Knob Insert – Part Number: WP8536939
$9.62
In Stock
Washer D-Shaped Knob Insert
★★★★★
★★★★★
(2)
Part #WP8536939
This insert is sold individually. Knob not included. Knob is sold separately.
Hose Clamp – Part Number: WP285655
$9.62
In Stock
Hose Clamp
★★★★★
★★★★★
(2)
Part #WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
Affresh Washing Machine Cleaner - 3 pack – Part Number: W10135699
$20.36
Special Order
Affresh Washing Machine Cleaner - 3 pack
★★★★★
★★★★★
(2)
Part #W10135699
Affresh Washing Machine Cleaner includes three slow-dissolving tablets that help remove odor-causing residue from inside the washer. Suitable for all washer brands, including high-efficiency (HE) machines, the formula is also septic-safe. Place one tablet directly in the empty wash basket and run the Clean Washer cycle, or use a normal cycle with hot water. Use monthly or every 30 wash cycles for best results.
Water-Pump – Part Number: W10876600
$103.58
In Stock
Water-Pump
★★★★★
★★★★★
(4)
Part #W10876600
This drain pump is specially designed to fit in top load washing machines. It is responsible for removing water from the washer tub during the drain cycle and directing it to the household plumbing system through the drain hose. If you notice longer draining times, grinding or rattling sounds, or standing water in the tub at the end of a cycle, the drain pump is likely faulty. This may be due to several reasons such as normal aging, wiring problems or physical damage. It is also common for the drain pump to become clogged with small items such as coins or buttons.
Spray Paint - 12 oz. - White – Part Number: 350930
No Longer Available
Spray Paint - 12 oz. - White
★★★★★
★★★★★
(3)
Part #350930
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a protective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.
Dryer Screw – Part Number: WPW10109200
$7.47
In Stock
Dryer Screw
Part #WPW10109200
11-16 x 3/4 Sold individually.
Refrigerator Single Hex Head Screw – Part Number: WP489069
$7.47
In Stock
Refrigerator Single Hex Head Screw
Part #WP489069
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
Hose Washer  Kit – Part Number: 285452A
$7.47
In Stock
Hose Washer Kit
Part #285452A
Washer fill hose gasket and screen. This is a set of 4.
Console Clip – Part Number: WP8312709
$20.37
In Stock
Console Clip
Part #WP8312709
Sold individually.
HOSE – Part Number: W10802689
$27.36
In Stock

Questions And Answers for 11028132411

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael - For model number 11028132411
July 7, 2021
Getting a clicking noise whil agitating?
Chris Boyle Profile
Hi Michael, Thank you for your question. If you are hearing a clicking noise coming from your washer when it is agitating there are some parts that you will need to check to see which one is causing the issue. You will need to check the gearcase, the clutch and the motor. We hope this helps! Good luck with the repair!
$98.24
In Stock
CLUTCH
$160.29
In Stock
STATOR
$132.29
In Stock
ROTOR
$204.36
In Stock
Gearcase
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Terry - For model number 11028132411
January 20, 2024
what is the capacity of this washer?
Chris Boyle Profile
Hello Terry, thank you for your question! Your model is 5.3 cubic feet. We hope this information is useful!
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Carol - For model number 11028132411
December 16, 2021
The lid will not lock so it can start
Chris Boyle Profile
Hello Carol, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11722981. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
$80.82
In Stock
Lid Lock Assembly
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the 11028132411

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Faulty fill valve
18 of 22 people found this instruction helpful.
  • Marian from GREYBULL, WY
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
Did troubleshooting after code LF showed on indicator window. Did troubleshooting; checked hoses for obstructions and small filters on inlets. All good. Ordered new fill valve. Came in a few days, good service.
Removed control panel top by removing screws on back of control panel, then by pushing putty knife under each side to rele ase spring clips. Carefully lifted cover and set onto lid. Photographed fill valve at left side as you are standing in front of machine. Removed screws with small ratchet. Carefully removed wires via clips. Lifted out valve.
Attached wires to new, set back into its place, replaced screws, tightened but not too tight so as to break part. Replaced control panel, pushing downward to engage spring clips, then replace screws on back.
Re attached hoses, ensuring they were on the correct sides, plugged machine into power, ran through cycle and VIOLA!! Worked perfectly!! After a couple weeks, still working perfectly! Was VERY happy it was only fill valve and not mother board as the cost was a fraction.
I found trouble shooting videos to be very helpful. Your service quite good.
Was this helpful?
Thank you for voting!
Water Inlet Valve inoperative
17 of 25 people found this instruction helpful.
  • Brian from FAIRBORN, OH
  • Easy
  • 30 - 60 mins
  • Nutdriver, Pliers
Washer would start cycle and return a CL error. No water would flow into the tub. Researched problem and probable cause. Ordered new water inlet valve. Once received, disconnected water hoses and electric plug and removed rear upper access panel (5 screws). Used thin putty knife under sides of front control panel to disengage spring clips . Once access to the faulty valve was attained, removed electrical harness and valve mounting screws. Installation of new valve was reverse process. Figuring out how to raise the front panel for access to the valve was most difficult. Found a YouTube video showing how; it was easy from there. Entire replacement took about 30 mins max.
Was this helpful?
Thank you for voting!
Scratches in Surface
83 of 227 people found this instruction helpful.
  • Michelle from Richardson, TX
  • Really Easy
  • Less than 15 mins
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Was this helpful?
Thank you for voting!