110279121 Kenmore Dryer Parts & Repair Help | PartSelect
Models > 110279121
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(17)
PartSelect #:PS334180
Manufacturer #:279311
If your dryer will not heat, takes too long to dry, or does not provide enough heat, you might want to replace your igniter kit. This silicone carbide igniter with ceramic holder k...
$40.20
In Stock
PartSelect #:PS11742733
Manufacturer #:WP489128
This screw is sold individually.
$6.98
In Stock
(1)
PartSelect #:PS11743744
Manufacturer #:WP681414
This screw is sold individually.
$5.26
In Stock
(2)
PartSelect #:PS11740485
Manufacturer #:WP234826
$17.20
In Stock
PartSelect #:PS11740486
Manufacturer #:WP234868
Sold individually.
$23.63
In Stock
PartSelect #:PS11740023
Manufacturer #:WP229742
$22.36
In Stock
PartSelect #:PS347972
Manufacturer #:353424
$14.59
In Stock
PartSelect #:PS3505737
Manufacturer #:W10295523
$16.21
Special Order
PartSelect #:PS345217
Manufacturer #:3393767
$55.21
Special Order
PartSelect #:PS382436
Manufacturer #:661580
This gas valve limiter (part number 661580) is for dryers. Gas valve limiter 661580 opens to release excess pressure from the gas valve if the gas supply pressure exceeds the norm...
$231.58
In Stock
Questions and Answers for 110279121
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

No heat to dry clothes

Igniter Kit – Part Number: 279311
  • Customer: Karen from Pine Mtn. Club,, CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 54 of 63 people found this instruction helpful
First I took the front of the dryer off then located the igniter. It only required removing two screws, removing old igniter, replacing with new igniter, and replacing the two screws.. While I was replacing the igniter I took the drum out and throughly cleaned the inside. Lucky me, I found 85 cents on the floor of the dryer. I am 65yrs old, married and m... read more

no heat

Igniter Kit – Part Number: 279311
  • Customer: rex from streator, IL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Wrench (Adjustable)
  • 27 of 34 people found this instruction helpful
the ignitor did not glow red checked thermal fuse by exhaust duct. fuse open replaced thermal fuse read more

dryer stoped heating

Igniter Kit – Part Number: 279311
  • Customer: valerie from Elasmore, KS
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 22 of 23 people found this instruction helpful
the problem was not the igniter its was the thermal fuse I broke the igniter during inspection of the problem be careful its a very easy thing to break repairs complete thank you parts select for the quick shipping and low prices read more