EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

1102644182 Kenmore Washer - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Dishwasher Faucet Adapter – Part Number: WPW10254672
$47.40
In Stock
Dishwasher Faucet Adapter
★★★★★
★★★★★
(26)
Part #WPW10254672
The faucet adapter for your portable dishwasher or washing machine attaches to the faucet and allows you to connect the machine to the tap. Before you install the faucet adapter on your taps, be sure that it fits the coupler on your dishwasher or washer. As per the factory, this is used for faucets with inside or outside threads. For female connection (outside) just remove the washers. This adapter is approximately 1 inch in length, and slightly less than one inch in diameter. This adapter comes with two different thicknesses of rubber washer. You will not need to use both so be sure to determine which thickness works best for your tap before installing it.
Hose Clamp – Part Number: WP285655
$9.62
In Stock
Hose Clamp
★★★★★
★★★★★
(2)
Part #WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
Drain Hose with Clamp – Part Number: 285664
$32.63
In Stock
Inlet Hose - 5 FT – Part Number: WP89503
$19.30
In Stock
Inlet Hose - 5 FT
★★★★★
★★★★★
(4)
Part #WP89503
This hose can handle hot or cold water and is five feet long.
Spray Paint - 12 oz. - White – Part Number: 350930
No Longer Available
Spray Paint - 12 oz. - White
★★★★★
★★★★★
(3)
Part #350930
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a protective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.
Water Inlet Hose Washer – Part Number: WP16123
$7.47
Special Order
Water Inlet Hose Washer
★★★★★
★★★★★
(2)
Part #WP16123
If your clothes washer is leaking, it is likely that there could be an issue with one of the hoses. If the hoses are in working order, you should check the washers connecting the hose to your unit. Rubber washers are tasked with enhancing the seal between the hose and washer. A faulty or damaged washer will not be able to perform this properly, and water will be able to leak from the poor connection. This OEM part is sold individually, so make sure you order the quantity that is needed. The washer measures 1 1/16 inches x 5/8 inches.
Refrigerator Cabinet Mount Screw – Part Number: WP489491
$7.47
In Stock
Refrigerator Cabinet Mount Screw
Part #WP489491
Sold Individually - 2 screws needed to mount each handle.
Screw – Part Number: 489392
$21.45
Special Order
Screw
Part #489392
This screw is sold individually.
Washer Siphon Break Kit – Part Number: 285320
$60.02
Special Order
Washer Siphon Break Kit
Part #285320
This six piece washing machine syphon break kit for is intended for use with plastic drain hoses. Use this kit with your Whirlpool/Kenmore brand washing machine.
Dryer Screw – Part Number: WP3400094
$7.47
In Stock
Dryer Screw
Part #WP3400094
Sold individually. (10-32 X 3/8)
Coupling Hose – Part Number: 285442
$50.56
Special Order
Coupling Hose
Part #285442
Screw – Part Number: WP8182296
No Longer Available
Screw
Part #WP8182296

Common Symptoms of the 1102644182

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
I had bought the portable dishwasher from an add in the paper and unfortunately I was unaware that they require faucet adapters and it was not given to me along with the appliance.
29 of 34 people found this instruction helpful.
  • Ronald from Chebanse, IL
  • Really Easy
  • Less than 15 mins
I ordered the part and it fit perfectly!! About five minutes to screw it onto my faucet and problem solved!!!
Was this helpful?
Thank you for voting!
Leaking drain hose
16 of 19 people found this instruction helpful.
  • Steve from Cypress, CA
  • Really Easy
  • Less than 15 mins
  • Pliers
First I removed hose from drain, next I loosened the clamp at the drain hose connection at the washer. Removed hose. Have rags/towels as there is some residual water that will spill out of the washer. Reinstall in reverse.
Was this helpful?
Thank you for voting!
there was a hole in the original drain hose
10 of 14 people found this instruction helpful.
  • Kathy from Pittsburgh, PA
  • Really Easy
  • Less than 15 mins
  • Pliers
First, I read the previous repair stories, so I knew what step to do first. So, first I took the hose off of the drain, then I removed it from the washer. And as the previous repair story stated, some water came out and I had a towel ready to catch the water that was in the hose. I threaded the clamp onto the new hose, pushed the new ho se onto the washer, used the pliers to open the clamp to better clamp the hose onto the washer. Then, placed the drain hose into the drain pipe and it was done! Thanks for such a great site!
Was this helpful?
Thank you for voting!