10N902-0018-E1 Briggs and Stratton Engine - Overview

This OEM grommet, also called a 90-degree breather tube, is sold individually. Black in color and made of rubber, this is a 90-degree elbow for the crankcase breather tube of your mower engine. If you notice a reduction in the mower engine performance, and engine backfires, this part is likely to be in need of replacing. It can develop cr...Read moreacks due to fatigue, and our troubleshooting tip is to inspect this part if dark smoke is coming out of the exhaust, it is a telltale sign. This is an easy repair to make, and does not require any tools. The new grommet attaches on the breather tube fromt he crankcase to the carburetor.

The manufacturer-approved Ratchet Pawl (Starter Pawl) comes in a set of two (2). This part attaches inside the recoil assembly, and is used to engage the flywheel. if broken due to wear/damage it will have a hard time engaging the fly wheel, making the engine harder to start, and should be replaced. Installation is rated as "Easy" by cust...Read moreomers, and will require a screwdriver, pliers and nutdriver. Refer to your make, model and diagram to ensure this is the correct part for you.This model is plastic and comes in white.

Genuine Briggs and Stratton replacement part, it includes the Diaphragm and Diaphragm Gasket. The purpose of the Diaphragm is to draw out fuel into the engine. The diaphragm is forced inward by ambient air pressure. The diaphragm is connected to the needle valve and as it moves inward it opens the needle valve to admit more fuel, this r...Read moreeplenishes the fuel as it is consumed. As fuel is replenished the diaphragm moves out due to fuel pressure and a small spring, closing the needle valve. Most manufactures will have rebuild kits that contain new Diaphragms in them.

This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Pliers to replace this item.

Genuine OEM replacement primer bulb for engines with a pulsa prime carburetor. This part is sold individually. It includes the Rubber Bulb and the Plastic Collar to attach it. A primer sends gas into the carburetor so it can create a fuel and air mixture that is ready to go right into the cylinder and keep the engine running. Over time a ...Read moreprimer bulb can dry out and crack. If the bulb is damaged it will not create suction and will not function as needed, therefore it will need to be replaced.

This is an OEM Manufacturer Sourced replacement part used on a variety of Briggs and Stratton Engines. This AC filter is made out of Foam and it is Sold Individually. Its purpose is to filter out dust and debris from contaminating the carburetor and engine.

This is a genuine OEM sourced replacement part. It is designed for use with lawn and garden engines. It is an important part of the starter assembly that is used to crank start the unit. Please note shroud/housing, starter pulley, starter spring, grip, the pull rope and the hardware are all sold separately. This pawl plate is made out of ...Read moreplastic and it is sold individually. To complete this repair you would need a wrench.

This OEM Oil Seal is an individually sold rubber part which is attached around the axis shaft on the crankcase housing to provide a proper seal. A broken seal will lead to a leak, and the part should be replaced. Installation is rated as "Medium" difficulty by customers, and will require a screwdriver, wrenchset and seal puller. Refer to ...Read moreyour make, model and diagrams to ensure you've chosen the correct part. This model comes in black and grey.

This manufacturer approved replacement part is a genuine starter rope. It is specially designed for use with small engines installed on lawn and garden equipment. This rope allow user to to crank start the engine. Includes one (1) fabric rope. Please note the grip/handle is sold separately.

The O-Ring is a black rubber part, used to provide a seal between two pieces. It can be used in various locations on a variety of equipment. Installation is rate as "Easy" and will require a screw driver, pliers, socket set, and wrench set. If broken, damaged, or worn due to fatigue, you will have a leak and the part must be replaced. Refer to your make, model and diagrams to see if this is the right part for you.

This is an OEM sourced replacement part designed for use with Briggs and Stratton engines. A governor spring regulates the engine RPM's under load conditions. This spring is made out of metal and it is sold individually. Replacing this item you would need a screwdriver and pliers.

This is an authentic OEM sourced replacement part that is intended to be used with lawnmower engines and outboard motors from Briggs & Stratton and Toro. The metal screw is used to secure the rocker cover to the cylinder head assembly. This item is available as an individual replacement part.