108-7 - Overview

This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place, on the impeller assembly. These nuts are a one-time use part due to their locking mechanism. You'll know the nut...Read more has broken when it appears to have damaged threads or rounded off edges. Customers found this to be an easy repair.

This rubber oil seal is supplied directly from the original equipment manufacturer for use commonly with snowblowers and a variety of other outdoor power equipment. It can be used to retain gear oil, seal the transmission, and prevent it from leaking out of the engine. The seal keeps the rotating parts adequately lubricated and protects t...Read morehem from friction damage. The seal also prevents dirt and debris from entering and damaging the equipment components. Over time the rubber material may wear down or tear, leading to oil leakage, increased friction, overheating, and damage to the equipment. To replace the seal, first drain the oil and use a seal puller or flat screwdriver to remove the old seal. Clean the area thoroughly to ensure a good fit for the new seal and add a thin layer of oil around the seal. Align the new seal on the mounting surface and use a seal driver or socket to press the seal down until it is secure. Remember to refill your oil before starting your equipment again.

This replacement hardware is sourced from original equipment manufacturer for use with Toro snowthrowers. It is standard hardware which has multiple applications, please refer to appropriate diagrams for correct location and use of this locknut. This part is made from durable metal and it is sold individually.

It is an authentic OEM part that is specially made for use with Toro and Lawn Boy snowthrowers. This is an identical replacement for a faulty or a missing hardware that was installed on a new unit. It is one of the screws utilized to secure the upper and the lower handles. This high-quality component is made of durable metal and is sold a...Read mores an individual item. Make sure to refer to the appropriate diagrams for your model to ensure the exact location and the correct application. A wrench will be needed to perform this repair.

This authentic replacement part is supplied directly from the original equipment manufacturer for use with Toro lawn and garden equipment. It is an identical replacement for a missing or a faulty carriage bolt that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and...Read more application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

This is an authentic replacement part manufactured for use with Toro snowthrowers. The special hex head screw is used with a variety of different snowthrower models and has multiple applications. This screw is available as an individual replacement part, please see model diagram for associative parts.

The clutch cable adjuster attaches to the extension spring. This part is available individually. It is an OEM Toro and Lawn Boy part directly sourced from the manufacturer for use in snowblowers. When replacing this item a set of pliers and a screwdriver might be required during the installation process. It is made out of metal and will need to be replaced if it breaks.

This is an original replacement part manufactured for use with snowthrowers. The spring cover is used to protect the spring that links the clutch cable to the bail assembly. This spring cover is available as an individual replacement part, please see model diagram for associative parts.

This Belleville washer, also known as a Belleville spring, is a type of cone/cup shaped washer, used in lawn and outdoor equipment. It is a thin, metal disc that tapers towards the center and functions like a spring when it is compressed. When a load is placed on the washer, the spring is engaged, and this allows it to absorb shocks and p...Read morerevent loosening and leakages while the equipment is running. It is used in places that have heavy loads and require the maintenance of high tension, such as, under the head of a fastener or in between two equipment parts. Over time, the Belleville washer can crack or become deformed leading to a loss of tension, excessive vibration, instability, and falling parts. If you are positioning the washer under a fastener, first remove the fastener before removing the faulty washer, and if it is between two components, you may first need to disassemble the components. Each washer is sold separately.

This is a genuine manufacturer-supplied part that is made for Toro and Lawn-Boy lawn and garden equipment. Bushings are commonly utilized to provide a tight fit between connected components allowing them to rotate with minimum friction. Over time the material will wear out and it may begin to fail eventually requiring a replacement. This ...Read morehigh-quality bushing is made of durable material and is sold individually. Refer to the parts diagrams for your model to ensure the correct repair procedure.