My Orders
1076 - Overview
Models starting with 1076
Click on the best match to narrow your results.
- 1076 Hoover Upright Vacuum
- 10760 (39000001-39999999 - 1993) Lawn Boy Lawn Mower (Lawnmower)
- 10760 Dynabrade Sander Polisher (6" 2-Hand Gear Driven Sander)
- 107601310 Craftsman Miscellaneous (Fishing Boat)
- 107607010 ( 2690713 2007 ) Briggs and Stratton Lawn Tractor (107.607010 - 2690713, Zts 7500, 24hp B&s With 50-Inch Mower Deck (2007))
- 107607010-2690713,ZTS7500 (2007) Briggs and Stratton Lawn Tractor Accessories (107.607010 - 2690713, Zts 7500, 24hp B&s W/50" Mower Deck (2007))
- 10760B (39000001-39999999 - 1993) Lawn Boy Lawn Mower (Lawnmower)
- 10761 Dynabrade Sander Polisher (6" 2-Hand Gear Driven Sander)
- 107611020 Craftsman Chainsaw (Gamefisher 12 Boat)
- 107611040 Craftsman Garage and Workshop (Gamefisher Bass Boat And Tri Hull)
- 107611120 Craftsman Chainsaw (Gamefisher 12 Boat)
- 107611121 Craftsman Miscellaneous (Sears Deluxe Gamefisher 12 Boat)
- 107611140 Craftsman Cultivator (Gamefisher 14 Foot Tri-hull Boat)
- 107611220 Craftsman Chainsaw (Sears Deluxe Gamefisher 12 Boat)
- 107611240 Craftsman Chainsaw (Gamefisher Bass Boat & Tri Hull)
- 10761132 Craftsman Chainsaw (Gamefisher 12 Boat)
- 10761142 Craftsman Miscellaneous (Gamefisher 12 Boat)
- 107611540 Craftsman Chainsaw (Gamefisher 14 Ft. Tri Hull Boat)
- 107611550 Craftsman Cultivator (Gamefisher Deluxe Tri Hull 14)
- 107611920 Craftsman Chainsaw (12 Ft. Tri Hull Boat)
- 107611940 Craftsman Chainsaw (Gamefisher 14 Ft. Tri Hull Boat)
- 10761B (5900001-5999999 - 1995) Lawn Boy Lawn Mower (Lawnmower)
- 10761B ( 4900001-4999999 1994 ) Lawn Boy Lawn Mower (Lawnmower Lawn Mower)
- 107624-01 Remington Chainsaw (Electric Chainsaw)
- 107624-02 Remington Chainsaw (Electric Chainsaw)
- 10762B (5900001-5999999 - 1995) Lawn Boy Lawn Mower (Lawnmower)
- 10763 Dynabrade Sander Polisher (8" 2-Hand Gear Driven Sander)
- 10764 Dynabrade Sander Polisher (8" 2-Hand Gear Driven Sander)
- 10765 (290000001-290999999 - 2009) Lawn Boy Lawn Mower (Insight Platinum Lawn Mower)
- 10765 (280000001-280999999 - 2008) Lawn Boy Lawn Mower (Insight Platinum Lawn Mower)
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$8.98
In Stock
Filter- A/C Cartridge
Part #491588S
This is a replacement air filter/AC cartridge for your small engine. The air filter prevents dirt and debris from entering the engine. Over time, the air filter can become clogged or damaged, and this can lead to reduced performance. This air filter is approximately 4 inches wide and approximately 5 inches long. To replace the air filter,...Read more locate the air filter cover on the side of the engine, unscrew it, and remove the old filter. Be sure to clear out any dirt, clippings, or other debris that has found its way into the air filter assembly before you insert the new filter. Reattach the air filter cover, and secure it with the screws. This product is sold individually.
Read less
$6.40
In Stock
Lawn Mower Spark Plug
Part #796112S
This is an OEM replacement part and is sold individually. Its propose is to deliver an electric current from an ignition system to the combustion chamber of a gas fueled engine. It will ignite the air fuel mixture by the spark. Spark Plugs will usually have to gapped to the manufactures specifications found in the owners manual. Over tim...Read moree a Spark Plug will become fouled because the air/fuel ratio may be set wrong,worn piston rings, carbon build up and other factors. It is better to replace a fouled spark plug, rather then trying to clean it.
Read less
$24.28
In Stock
Carburetor Overhaul Kit
Part #498260
This is a replacement carburetor overhaul kit for your small engine. The carburetor is essential to the overall performance of your engine, and the carb can get clogged up over time for a variety of reasons. When your carb becomes clogged, it is often a good idea to take it apart and replace the various parts inside by purchasing a carbur...Read moreetor kit. This is a 15-piece set and contains everything that you will need to do a total overhaul of your carburetor. You may want to purchase some carb cleaner as well, to ensure that the new pieces in the carb kit fit and adhere properly.
Read less
$6.40
In Stock
Snow Blower Shear Pin
Part #703063
Shear Pins are designed to break off in order to prevent further damage to your machine. Because they are designed to break, we recommend having a few spares on hand. This part is made of metal, is silver, is not part of a kit or assembly, and is sold individually.
A Shear Pin will break when you hit a large chunk or ice or other debris...Read more. Once it is broken, it will need to be replaced. You will need pliers to complete this repair.
Customers rate this repair as Easy.
Read less
$6.40
In Stock
Gasket-air Cleaner
Part #795629
The Air Cleaner Gasket is used to provide a seal between the air cleaner base, and carburetor. It's a gray, composite material part, which is rated as "Easy" to install and will require a screw driver, pliers, socket set, and nut driver. It attaches between the base of the air cleaner assembly and carburetor. If broken, damaged or worn do...Read morewn it will allow dirt to enter the carburetor, causing performance issues. If this happens, replace it. Refer to your make, model and diagrams to check if this is the right part.
Read less
$6.40
In Stock
Primer-carburetor
Part #694395
This is an original Craftsman part for use with Lawn Mowers. The carburetor primer bulb circulates fuel to the carburetor to provide quicker starting. The most common reasons for replacing the primer bulb are when the engine leaks gas or won't start. This part is sold individually. The tools that you will need to replace the carburetor pr...Read moreimer bulb is an 8mm socket or nut driver, small flat-head screwdriver and a Phillips-head screwdriver.
Read less
$6.55
In Stock
Nut-lock, Ni
Part #3296-42
This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place, on the impeller assembly. These nuts are a one-time use part due to their locking mechanism. You'll know the nut...Read more has broken when it appears to have damaged threads or rounded off edges.
Customers found this to be an easy repair.
Read less
$6.40
In Stock
Starter Pawl-Ratchet
Part #281505S
The manufacturer-approved Ratchet Pawl (Starter Pawl) comes in a set of two (2). This part attaches inside the recoil assembly, and is used to engage the flywheel. if broken due to wear/damage it will have a hard time engaging the fly wheel, making the engine harder to start, and should be replaced. Installation is rated as "Easy" by cust...Read moreomers, and will require a screwdriver, pliers and nutdriver. Refer to your make, model and diagram to ensure this is the correct part for you.This model is plastic and comes in white.
Read less
$8.91
In Stock
Kit-needle/seat
Part #398188
This needle and seat kit, also known as a float valve, is found in many types of liquid-fueled lawn equipment, such as carburetors. The valve regulates the flow of fuel into the float bowl. The needle and seat work together to make sure that the valve opens and closes properly, so that it does not leak or overflow. If it is broken, you ma...Read morey notice a strong odor of fuel coming from your machine. Your engine may also run poorly or not start at all. A damaged or corroded float valve can cause fuel leaks, which can be dangerous as they are flammable. To remove the float valve, first disconnect the spark plug wire on your machine. You then need to consult your user manual to locate the float bowl of your machine and remove the bolts or screws securing their cover in place. When you lift off the cover, you will find the needle attached to the float. Using a pair of needle-nose pliers, grasp onto the needle and pull it out of the float. Keep in mind when you are purchasing this OEM-manufactured kit that it comes with the needle and seat together, but the float itself is not included.
Read less
$51.18
In Stock
Engine Gasket Set
Part #590508
This genuine OEM engine gasket set is sourced directly from the manufacturer and includes the gaskets needed to seal the components in a gas-powered engine. This set ensures proper fit and performance to maintain the life of your lawn equipment engine. When installing replacement gaskets, make sure to wear work gloves to protect your hands.
$6.55
In Stock
Stepped Washer
Part #614426
The Stepped Washer is used to secure the wheels onto the shaft of a push mower. It attaches to the wheel axle. If broken due to wear/fatigue, the wheel will come off and the part should be replaced. Installation is rated as "Easy" by customers and will require a socket set. This part is individually sold, gray, and constructed of metal. R...Read moreefer to your make, model and diagrams to check if this is the right part for you.
Read less
$25.54
In Stock
Pulley/spring Assembly
Part #498144
Upgrade your equipment with this reliable Pulley/Spring Assembly from Briggs and Stratton. Known for their superior quality, Briggs and Stratton parts are designed to help prolong the life of your machines, contributing to their efficiency and performance. This assembly is precision engineered to meet rigorous standards, ensuring robust, ...Read morelong-lasting usage. It aims to improve your machines functionality while maintaining its overall operation efficiency. Enhance your units performance with the assurance of Briggs and Stratton, a trusted name in the industry. Invest in this top-quality Pulley/Spring Assembly and experience the difference today.
Read less
Exact Part matches for your search term
No Longer Available
No Longer Available
$54.00
Special Order
No Longer Available
$16.30
Special Order
$2.99
Special Order
Common Symptoms of models starting with 1076
How this model fails, and the parts that fix it.
Will Not Start
Fixed by
these parts
these parts
Show All
Cannot pull starter cord out or engine will not turn over
Fixed by
these parts
these parts
Show All
Engine will not idle
Fixed by
these parts
these parts
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The hub that the mower blade mounts to was broken
8 of 26 people
found this instruction helpful.
The hub that the mower blade mounts to was brokenPut the new Harbonne played and played securing flange bolted it up
Other Parts Used:
Was this helpful?
Thank you for voting!