10738 - Overview

The Stepped Washer is used to secure the wheels onto the shaft of a push mower. It attaches to the wheel axle. If broken due to wear/fatigue, the wheel will come off and the part should be replaced. Installation is rated as "Easy" by customers and will require a socket set. This part is individually sold, gray, and constructed of metal. R...Read moreefer to your make, model and diagrams to check if this is the right part for you.

This OEM Locking Ring holds components or assemblies onto a shaft or in a housing/bore when installed in a groove. Installation is rated as "Easy" by customers and will require pliers. The part secures the drive pinion gear to the drive shaft, and if broken due to wear/fatigue/damage, it will need to be replaced.

This is a Genuine OEM replacement part used on a variety of Lawn Mowers. This item is made out of Metal and it is Sold Individually. If either the ball bearing or the bearing retainer wear out this will cause the wheels have trouble turning. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the lo...Read moread and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

This genuine OEM replacement cable is designed for select Toro and Lawn Boy walk-behind lawnmowers. As a critical component of the mower's safety system, it engages the blade control mechanism and stops blade rotation when the control bar is released. Over time, normal wear and tear can cause the cable to fray, stretch, or break at the en...Read moreds, resulting in reduced performance or complete failure. If the cable becomes damaged, replacement is recommended to restore safe and proper operation. Installation is straightforward and typically requires only basic hand tools, such as pliers, a wrench, and a screwdriver. This replacement cable is sold individually.

Genuine OEM sourced part used on variety of Toro Lawn and Garden Equipment. This part is sold individually and the Nut is not included. The square area under the head is designed to fit into a square hole in the workpiece. It is this square hole that restrains the bolt and keeps it from turning when the nut is tightened.

For all your repair needs, look no further than this Genuine Toro Ring-Retaining. Perfect for various equipment repair tasks, this Toro OEM part epitomizes robustness and durability. Crafted to the highest quality standards, the retaining ring guarantees excellent performance and longevity. This retaining ring is easy to install, requirin...Read moreg less time on repair and more time enjoying your revitalized equipment. Purchase a touch of pro-grade quality with the Toro Ring-Retaining. Make Toro your choice for reliable, efficient, and long-lasting equipment solutions.

This OEM-sourced washer in your walk-behind lawnmower provides space and protects the rear wheel from rubbing against the pivot arm assembly, ensuring smooth wheel rotation. A damaged washer may appear worn or cracked, causing the rear wheel to feel misaligned or wobble excessively. If not replaced, it can lead to increased wear and expen...Read moresive repairs. To remove the existing washer, prop up the wheel with a two by four, use a wrench to remove the bolt securing the wheel, slide out the wheel, and then remove the bolt on the rear adjuster to take off the washer. Please note that this washer is sold individually, so make sure to check the quantity needed for your machine before making your purchase.

This replacement v-belt is a genuine OEM approved part that is designed for use with Toro lawn mowers. It is the main belt that rotates the mower blade. Make sure to clean pulleys before installing the new belt to ensure top performance and longevity with your new belt. Inspect belt periodically and replace it when worn or stretched to ma...Read moreintain optimum performance. This part is made from durable rubber material and it is sold individually.

The Blade Support is a 6-x-3-inch Black, metal part used to support the blade. It's rated as "Easy" to install by customers. It must be torqued to manufacturer specifications which will require a socket set and wrench set. It attaches to the blade assembly. If there are rattling sounds or other srange sounds coming from the blade area tha...Read moret is a sign the part has been broken or damaged due to wear or fatigue and should be replaced. Refer to your make model, and diagrams to ensure you choose the right part.

This authentic OEM sourced replacement bolt is generally used on Toro lawn mowers. The purpose of this bolt is to secure the cutting blade to the blade driver assembly. This is a hex head bolt which is sold individually. It includes a metal washer. Please note you would need a wrench to replace this blade bolt.

This item is an authentic Toro replacement part that has been OEM sourced to be used with walk-behind lawnmowers. The plastic cable guide attaches to the handle assembly and is used to keep the control cable out of the way by securing it in the middle of the handle. This item is priced as a single part.

The metal blade driver assembly attaches to the blade with the guide belt wrapped around it. The spacer will go inside the driver. This part is used in lawn mowers. If the lawn mower wheels will not turn you may need to replace the blade driver. A wrench will be needed to replace this part if it becomes damaged. The driver is available as an individual replacement item and is an original Toro part.

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.