- Home
- 1069651710
- Instructions
1069651710 Kenmore Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Getting Ice Maker to sit in place prior to tightening screws.
3 of 3 people
found this instruction helpful.
-
George from POWELL, OH
- Easy
- 15 - 30 mins
-
Nutdriver
Don not completely remove holding icemaker screws. Unit slips over screws and drops down into place and the use nutdriver to tighten in place. Rest of unit was sound and wasn’t replaced.
After icemaker is installed wait for a while and unit self activated and creates ice cubes.
After icemaker is installed wait for a while and unit self activated and creates ice cubes.
Was this helpful?
Thank you for voting!
broken self
4 of 6 people
found this instruction helpful.
-
JAMES from HILTON, NY
- Very Easy
- Less than 15 mins
This was a simple install. I just replaced the glass shelf on the sliding shelf bracket.
Was this helpful?
Thank you for voting!
Installed a Ice Maker
3 of 3 people
found this instruction helpful.
-
Don from HOUMA, LA
- Very Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Very easy to install
Was this helpful?
Thank you for voting!
The icemaker quit making ice.
3 of 3 people
found this instruction helpful.
-
Tom from Summerville, SC
- Really Easy
- 15 - 30 mins
-
Screw drivers
With instructions from PartSelect.com this was an easy fix. I tested the motor's electric as suggested and was satisfied that the Motor Module (WPL W10190935) would correct the problem. UNPLUG THE REFRIGERATOR! I popped the outside plastic cover off to expose the unit. (1) remove the wire unit that runs the length of the cube maker (2) re
... Read more
move the 3 screws that secure the motor unit and carefully remove it (3) carefully line up the new unit, slide in place and replace the 3 screws (4) install the wire that was removed in step(1). Connect electric to the refrigerator and wait about 2 hours for your first ice cubes. PartSelect.com is the ONLY supplier that you will ever need! Great instructions and trouble shooting suggestions. Shipping is incredibly fasssst! Customer contact is awesome. Don't hesitate to buy from them! Saved me about $200.! Good luck....Tom in SC
Read less
Was this helpful?
Thank you for voting!
Installed new glass crisper
3 of 3 people
found this instruction helpful.
-
Rebecca from WEST JORDAN, UT
- Very Easy
- Less than 15 mins
Open your door as far as it will go. Line it up with the plastic holder should just slide into place.
Was this helpful?
Thank you for voting!
icemaker was overfolwing with water
5 of 9 people
found this instruction helpful.
-
David from West Bloomfield, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
ordered the part, pulled out the icemaker unit, removed the module, put the new module in, reinstalled the ice maker unit and let it run.
Was this helpful?
Thank you for voting!
Fill cup broke.
6 of 12 people
found this instruction helpful.
-
Aliki from Miami, FL
- Really Easy
- Less than 15 mins
Very easy to order from parts select. Took seconds to replace.
Was this helpful?
Thank you for voting!
Crisper Glass Shelf
5 of 9 people
found this instruction helpful.
-
Andrea J from Davenport, FL
- Really Easy
- Less than 15 mins
Took the glass shelf out of the fridge in our rental home to clean and it just shattered in our hands. Did a search online and found part select, phoned to make sure I was looking at the correct part, the lady on the phone was very helpful. I ordered the shelf using the next day service as we were returning home to the UK within 3 days so
... Read more
did not want to take the chance of not receiving it before we left. I got the notification the part had been dispatched, the part was delivered early next morning. Took the shelf out the package and placed in the tray, job done!. Great service will definately use again, have book marked the site.
Read less
Was this helpful?
Thank you for voting!
Raplaced switch
5 of 9 people
found this instruction helpful.
-
Winston A from Brooklyn, NY
- Really Easy
- Less than 15 mins
-
Pliers
Repair went well,took about five to ten minutes to disconnect the power from the fridge removed the defective switch installed the new one ,reconnected the power,,,and Let there be light and there was light!
Was this helpful?
Thank you for voting!
gasket was cut and ripped
3 of 3 people
found this instruction helpful.
-
Herbert from NIAGARA FALLS, NY
- Really Easy
- 30 - 60 mins
-
Screw drivers
rippped the old one off and carfully put the new one on with a flat head screwdriver at an angle as not to rip the new one
Was this helpful?
Thank you for voting!
Stopped Making Ice
4 of 6 people
found this instruction helpful.
-
WARREN from JACKSONVILLE, OR
- Really Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
Followed on line video
Was this helpful?
Thank you for voting!
It was my first time to install a ice maker.
3 of 3 people
found this instruction helpful.
-
Gary from MACOMB, OK
- Easy
- 1- 2 hours
-
Nutdriver, Screw drivers, Wrench (Adjustable), Wrench set
I first read the instruction manual then I watched the installation video. My water line to it was 3/8. Went to the local ACE Hardware to purchase a short peace of 1/4 copper tubing and the fittings to connect them together. It makes ice every 55 minutes.
Was this helpful?
Thank you for voting!
Light switch wasn't working.. As I would close the door I would notice our frig light wasn't going off...
3 of 4 people
found this instruction helpful.
-
David from Hemet, CA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
I simply removed the old switch by gently pulling down on the old switch with a screwdriver. When it was about half way out I just gently pulled down on the old switch and it popped out... I removed the two connectors attached to the old switch by pulling on the connectors with a pliers...I tried using my fingers but wasn't able to pull t
... Read more
he connectors off so I used pliers. It worked perfectly.. When pulling off the old connectors, make sure you attach the new switch to the same tabs on the new switch... It was very easy to do and took under 5 mins.....The light switch works perfect....P.S. You should unplug the frig while making the connection just in case....Safety first....!!!
Read less
Was this helpful?
Thank you for voting!
defective light switch
3 of 4 people
found this instruction helpful.
-
THOMAS from WILLARD, OH
- Really Easy
- Less than 15 mins
inserted a knife between the switch and the plastic interior in order to pop the switch out.
then took off the 2 wires on the old switch put them on the new switch and reinserted the switch into the plastic interior.
then took off the 2 wires on the old switch put them on the new switch and reinserted the switch into the plastic interior.
Was this helpful?
Thank you for voting!
My pan crisper is broken.
4 of 7 people
found this instruction helpful.
-
Raymond from Westford, MA
- Really Easy
- Less than 15 mins
The repair story webpage has some problems. I want to rate it "very helpful" but it showed "not helpful". I am pleased with the order service. It was very hard to find the parts on the web. There are a couple of web sites but only partselect has it in inventory. I ordered it, and it came in within 5 days. Excellent service. Will c
... Read more
ontinue to order parts from this site in the future.
Read less
Was this helpful?
Thank you for voting!