EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

1069632890 Kenmore Refrigerator - Instructions

All Instructions for the 1069632890
76 - 90 of 143

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door Light switch cracked Mounting
0 of 1 people found this instruction helpful.
  • Paul from Hinsdale, IL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I noticed that the refrigerator was having trouble maintaining temperature. Thought it might be time for new one until I found out that a new frig was $5k to $7K. Just happened to notice that the light switch didn't look quite right (was not sitting sqaure to the door). Once I pressed it it came loose. I then realized the the lights we re staying on (50 watts of heating). Replaced the switch and the frig started working like new.
Was this helpful?
Thank you for voting!
Broken light switch
0 of 1 people found this instruction helpful.
  • George from North Scituate, RI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Part was easy to order, delivered quickly, installation very easy. Just unplug the unit, pop out the old swich using a screwdriver, disconnect and reconnect leads and pop switch back in. Definitely recommend that you can do it too.
Was this helpful?
Thank you for voting!
light staying on
0 of 1 people found this instruction helpful.
  • Cecelia from Beaver Dam, WI
  • Easy
  • 15 - 30 mins
  • Screw drivers
A very cold and brittle switch in a 17 year old fridge. Used screwdrivers to pry out with some resistance Had to cut the molded plug in half and split wires, because replacement contacts were farther apart than the original. End result, works great.
Was this helpful?
Thank you for voting!
replacement bar on door
0 of 2 people found this instruction helpful.
  • Doug from Quincy, MA
  • Easy
  • 15 - 30 mins
ordered the wrong part at first. Spoke to a service assistant, returned it and got the right part. Cut it to fit and inserted it. The Service assistant was very helpful, wish I used her first rather than the online system.
Was this helpful?
Thank you for voting!
non-functioning refrigerator lite switch
0 of 2 people found this instruction helpful.
  • Ronald from Billings, MT
  • Really Easy
  • Less than 15 mins
  • Pliers, Wrench set
My owners manual said to unplug fridge from elec outlet, use a kitchen knife to gently pry off the switch plate
(manual had a pictoral example), unclip the two wire, replace with on new switch and replace the switch. Close
door and plug back in. Open door to check that the lite
works. Walla! It did. Thanks!

Sin cerely, Ron Marshall, Billings, MT
Was this helpful?
Thank you for voting!
light switch would not work
0 of 2 people found this instruction helpful.
  • Joseph from Destin, FL
  • Really Easy
  • Less than 15 mins
Popped the old one out with a kitchen knife and popped the new one back in. It tool less than 15 seconds!!
Was this helpful?
Thank you for voting!
The light went out
0 of 2 people found this instruction helpful.
  • Janet from Flagstaff, AZ
  • Easy
  • Less than 15 mins
  • Screw drivers
I pried the old one out with a screw driver and pushed the new one in. I expected instructions in the box it came in but there were none.
Was this helpful?
Thank you for voting!
Switch was not working after a repairman had fixed something else
0 of 4 people found this instruction helpful.
  • Jackie from Nova, OH
  • Really Easy
  • Less than 15 mins
Please bear in mind I am 65 years old & it was harder to get up & down off the floor then to change the switch. Was very easy - watched video, unplugged unit. I used the putty knife at the right front corner to work loose, when it came loose had to loose the left side a little. The unit pulled out easily. detached the wired that had a single plug with 2 prongs on it. Attached the plug, pushed new switch into place. There was no way you could place wires on wrong prong. When done, plugged refrigerator back in & checked if working. I CAN SEE THE LIGHT and the food in the freezer now. Thank you for making an easy repair.
Was this helpful?
Thank you for voting!
fan motor did not run all the time
  • Charles from Marion, IN
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Pliers, Screw drivers
unpluged refrigerator. removed panel in front of fan. Removed the fan motor. Installed the new fan kit. Replaced the panel in front of fan. Pluged the refrigerator back in. The refrigerator runs a 100 percent better
Was this helpful?
Thank you for voting!
freeser and cooler they wasnt work and it won't start
  • PATRICIO from CHARLOTTE, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First thing, I didn't have any idea how to fix my refrigerator, but I saw some videos on line, I just pull the start relay, it sound like little parts inside. I order to PART SELECT my Start Relay combination and part select have more comments, diagrams it was easy to find the part. Put the new start relay was easy, I just conect those wi res back it took less than 10 minutes and it's working now.thanks to Part Select to make easy to fix it.
Was this helpful?
Thank you for voting!
Compressor having hard time kicking on
  • sarah from dearborn, MI
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Pliers
I simply watched the repair video and did it! Super easy, needed start device and capacitor. As easy as unplugging the old and adding the new. The video helped and gave me confidence. Wives can fix fridges too! Saved me $2500. Looks like I'll need a new excuse if I want a new fridge.
Was this helpful?
Thank you for voting!
exchange of defective light rocker switch
  • Steve from River Edge, NJ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
1)pry out the old/defective light rocker switch with a screw driver (flat head) and pull out the cables 2)unplug two connectors at the end of light rocker switch 3) connect new light rocker into two connectors 4)push the wires inside and put back new light rocker switch
Was this helpful?
Thank you for voting!
Light in the refrigerator didn't work
  • Anthony from Fairport, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I did exactly as the video showed. I popped out the old switch, disconnected the two terminals, connected the new switch and put it back. The light now works! The refrigerator is over 25 years old and the switch works! What a great website this is. Couldn't of done the job without Partselect's help.
Was this helpful?
Thank you for voting!
No light in frig
  • Irene from Whitehall, MT
  • Really Easy
  • Less than 15 mins
We tried repairing with a new switch which was very easy to install but it didn't fix the problem.
Was this helpful?
Thank you for voting!
light would come on and off
  • Dora from Rock Island, IL
  • Really Easy
  • Less than 15 mins
Viewed the viedo - it showed what to do
Was this helpful?
Thank you for voting!
All Instructions for the 1069632890
76 - 90 of 143