My Orders
- Home
- 1069608380
- Instructions
1069608380 Kenmore Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken shelf supports
1 of 2 people
found this instruction helpful.
-
Bob from Las Vegas, NV
- Really Easy
- Less than 15 mins
Took just a few moments to install. The parts fit like a glove,
Was this helpful?
Thank you for voting!
Two of the parts were broken so the shelf was laying on the drawers so neither could be used effectivly
1 of 2 people
found this instruction helpful.
-
ROD from LINCOLN, NE
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Pulled out the stud with a wire cutter and replaced it with the exact part you shipped in the kit.
The other 2 parts just slipped on the brackets
Nice thing is now I have extra parts for the other shelf.
The other 2 parts just slipped on the brackets
Nice thing is now I have extra parts for the other shelf.
Was this helpful?
Thank you for voting!
Movers broke the icemaker water fill tube shoving my refrigerator through the front door.
1 of 2 people
found this instruction helpful.
-
Christopher from Valley Village, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
I unscrewed the fill tube screws from the back of the fridge, and pulled the tube out.
Then I put the new tube in, screwed the screws back in and reconnected the waterline.
Then I put the new tube in, screwed the screws back in and reconnected the waterline.
Was this helpful?
Thank you for voting!
light did not work on the refrigerator side
1 of 2 people
found this instruction helpful.
-
David from GROVESPRING, MO
- Easy
- Less than 15 mins
bulbs were not burnt out. received the new switch in a few days. watch the short video, was good to see how it comes out. used a putty knife to release the defective switch, removed wires put them on the new one and posed the new switch back in. Not bad Part cost $11.00 7 dollars shipping so for 17 bucks it works great. nice to see what i
... Read more
s inside the refer!
Read less
Was this helpful?
Thank you for voting!
Nonr
1 of 2 people
found this instruction helpful.
-
Gaynell P from Spring, TX
- Really Easy
- Less than 15 mins
Replaced missing stud.
Was this helpful?
Thank you for voting!
Water tubing was accidentally broken from the back of the freezer.
1 of 2 people
found this instruction helpful.
-
Lois from Thomasville, AL
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed the two screws holding the funnel in place...removed the old one and replaced it witht he new tubing...screwed screws back in and the jov was complete. It actually took longer to get it out of the sack than it did to put it together
Was this helpful?
Thank you for voting!
Poor design leaves fitting vulnerable to damage. Part was broken when pushed to close to the wall.
1 of 2 people
found this instruction helpful.
-
Mike from Camas, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
Simply removed the old and replaced with the new part.
Was this helpful?
Thank you for voting!
A door handle mount broke on the freezer door.
1 of 3 people
found this instruction helpful.
-
Dominic from Walton, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
The repair was easy. The amazing story was that I ordered the part around 12:00 noon on Friday December 21st and it arrived by USPS mail the next day Saturday December 22, right in the heat of the Christmas rush.
Was this helpful?
Thank you for voting!
Old tube had cracked due to being frozen....
1 of 3 people
found this instruction helpful.
-
Stephen from Greensboro, NC
- Really Easy
- Less than 15 mins
-
Nutdriver
I followed the simple steps outlines in the great video! Thanks
Was this helpful?
Thank you for voting!
Filler Tube Broken At Elbow Where Line Hooks Up To
0 of 1 people
found this instruction helpful.
-
LARRY from PARKER, AZ
- Really Easy
- Less than 15 mins
-
Nutdriver, Screw drivers
Replaced fill tube
Was this helpful?
Thank you for voting!
After Hurricane Irene refrigeration compressore did not start
1 of 4 people
found this instruction helpful.
-
Bobby from New Bern, NC
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Followed the directions. Installation was quick. Took loner to put the covers back on and push the applicance back in position than the repair.
Was this helpful?
Thank you for voting!
thread broke
0 of 1 people
found this instruction helpful.
-
uri from riverhead, NY
- Really Easy
- Less than 15 mins
-
Screw drivers, Wrench (Adjustable)
Unscrew broken piece, pull it out and then insert new one, security it in place and connect water line again, make sure It's thight check for leaks and done
Was this helpful?
Thank you for voting!
Door Light switch cracked Mounting
0 of 1 people
found this instruction helpful.
-
Paul from Hinsdale, IL
- Really Easy
- Less than 15 mins
-
Screw drivers
I noticed that the refrigerator was having trouble maintaining temperature. Thought it might be time for new one until I found out that a new frig was $5k to $7K. Just happened to notice that the light switch didn't look quite right (was not sitting sqaure to the door). Once I pressed it it came loose. I then realized the the lights we
... Read more
re staying on (50 watts of heating). Replaced the switch and the frig started working like new.
Read less
Was this helpful?
Thank you for voting!
Broken bracket
1 of 4 people
found this instruction helpful.
-
Raymond from Victorville, CA
- Really Easy
- Less than 15 mins
Replaced broken shelf bracket
Was this helpful?
Thank you for voting!
Part broke.
0 of 1 people
found this instruction helpful.
-
Felix A from Orlando, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
Replacement partfit perfectly.
Was this helpful?
Thank you for voting!