All Installation Instructions for Kenmore Refrigerator 1069334301

fridge door switch did not work

2 of 2 people found this instruction helpful.

stu from richmond, VA
Easy
Less than 15 mins
Socket set

I removed the switch housing (4 screws), replacing the switch in the housing was a snap. It took 5 minutes, cost $8 and light works like new!

Why didn't I order this part and do the repair earlier? Very simple.

Was this helpful?

Crisper post was missing

3 of 6 people found this instruction helpful.

Annette from Coon Rapids, MN
Easy
Less than 15 mins

My refrigerator is about 26 yrs old and the part I received must have been for newer models, but I was able to insert the part into a little rubber part attached to the bottom the refrigerator,

Was this helpful?

Broke light switch while cleaning

2 of 3 people found this instruction helpful.

Gail from Golden, CO
Really Easy
Less than 15 mins

use kitchen knife to pry out. replaced switch assemble and pressed back into place. Could not have done this with out help from previous customers. Thanks

Was this helpful?

the freezeer gasket was not sealing properly and the refrigerator door one was torn

2 of 3 people found this instruction helpful.

christine from hackensack, NJ
A Bit Difficult
1- 2 hours
Socket set

Since the parts arrived with no instructions and I had a vague idea of what I had to do, I went on You-tube and watched a video which was very helpful. It was a little difficult at first but once I got the hang of it things went smoothIy. It's like a brand new refrigerator now!

Other Parts Used:

Freezer Door Gasket

Fresh Food Door Gasket

Was this helpful?

The plastic water fill tube got cracked when we moved. I called a parts company and they told me they couldn't just sell me the tube I would have to buy a whole kit for about $50 dollars. I decided to glue the tube. It worked for a while then it started leaking. So I thought I would have to buy

3 of 6 people found this instruction helpful.

Joseph from Chesterfield, MO
Really Easy
Less than 15 mins
Screw drivers

I hand screwed the fill tube into the water tube and stuck it into the freezer hole. I screwed the fill tube to the back of the refrigerator.

Thanks so much! You saved me a bundle!!

Was this helpful?

Connection leaked as tube entered freezer

1 person found this instruction helpful.

Robert from MERRIMACK, NH
Very Easy
15 - 30 mins

Followed video and had one problen, the metal pipe would not release as shown,so I used a hacksaw between the plastic and metal pipe, removing the metal pipe from inside as the video shows. Good instructions.

Was this helpful?

Light rocker switch broke and refrigerator light couldn't go on.

2 of 4 people found this instruction helpful.

Cathy from HOPATCONG, NJ
Very Easy
Less than 15 mins

I just popped out the old switch with a flat head screwdriver. Removed the connections and then installed new switch by reversing steps. Popped in back in and the light went on.

Was this helpful?

door hinge broke.

2 of 4 people found this instruction helpful.

Bernard from DONALDSONVLLE, LA
Really Easy
15 - 30 mins
Nutdriver, Screw drivers

Removed door and replaced bushing bracket was ok.

Was this helpful?

Light switch broke

2 of 4 people found this instruction helpful.

Carolee from Spokane Valley, WA
Really Easy
Less than 15 mins
Screw drivers

Pried out old part with screwdriver. Unplugged. When new part came, just plugged it in and pushed the part into place.

Was this helpful?

The Light Socket Burned Out.

5 of 13 people found this instruction helpful.

MATTHEW from STOCKTON, CA
Really Easy
Less than 15 mins

I pulled the socket out and unplugged the wires. I replaced the light socket by plugging in the wires and snapping the light socket into place. A very simple fix.

Was this helpful?

Ice maker not working