EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

10689592102 Kenmore Ice Maker - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator Water Filter – Part Number: F2WC9I1
$78.26
In Stock
Refrigerator Water Filter
★★★★★
★★★★★
(8)
Part #F2WC9I1
This genuine OEM replacement part is a water filter for your fridge or freestanding ice maker. The filter is used to remove contaminants and particles from the water, to ensure a clean and fresh taste. The filter should be replaced every six to nine months, or after 2000 gallons of water have passed through, whichever occurs first.
Refrigerator Switch – Part Number: W11291138
$28.42
In Stock
Refrigerator Switch
★★★★★
★★★★★
(15)
Part #W11291138
If your refrigerators interior light is not working, the door light switch may be the part to replace. It activates the light as the door opens or closes and has two push-on wire connections. Unplug the refrigerator before installation, and confirm fit using your refrigerators model number. This is an OEM part.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(7)
Part #72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
Ice Maker Bin Temperature Sensor – Part Number: WPW10511923
$54.24
In Stock
Ice Maker Bin Temperature Sensor
★★★★★
★★★★★
(19)
Part #WPW10511923
Keep ice production in step with available bin space using this ice maker bin thermistor. The probe senses temperature changes as ice accumulates around it and sends that information to the control board, allowing production to pause when the bin is full. A failed sensor may cause overflowing, early shutdowns, or interrupted ice production. Replacing a faulty thermistor helps restore accurate temperature feedback. Disconnect appliance power before installation, handle the probe and wiring gently, and secure the sensor in its original mounting position This is an OEM part sourced directly from the manufacturer.
Spray Paint - 12 oz. - White – Part Number: 350930
No Longer Available
Spray Paint - 12 oz. - White
★★★★★
★★★★★
(3)
Part #350930
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a protective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.
Ice Maker Water Distributor Tube – Part Number: W10863947
$51.61
In Stock
Ice Maker Water Distributor Tube
★★★★★
★★★★★
(1)
Part #W10863947
The water distributor tube distributes water from the reservoir to the evaporator plate.
Touch-up Paint - Black – Part Number: 72032
No Longer Available
Touch-up Paint - Black
★★★★★
★★★★★
(5)
Part #72032
This authentic OEM black touch-up paint is specifically designed for repairing minor scratches, chips, or blemishes on your kitchen appliances. The bottle contains 16ml or 0.6oz of black paint and has an applicator brush under the cap, the same way a nail polish bottle is designed. Restoring these visible damages is important because cracked or chipped surfaces can become a breeding ground for dirt and bacteria. If your existing bottle of paint has a thick or clumpy consistency, do not use it. Remember to shake the bottle before applying the paint to your appliance. Please keep in mind that this bottle is sold individually.
Water Inlet Valve with Quick Connections - 120V 60Hz – Part Number: W10881366
$91.08
In Stock
Water Inlet Valve with Quick Connections - 120V 60Hz
★★★★★
★★★★★
(5)
Part #W10881366
Control water filling with this ice maker water inlet valve assembly. Its electric coil opens the valve when water is needed and closes it to stop the flow between fills. Quick-connect fittings hold the water lines securely at the valve. A worn or damaged assembly may cause slow filling, reduced ice production, unwanted dripping, or leaks around the housing. Replacing a faulty valve helps restore proper water delivery and shutoff. Unplug the appliance and turn off the water supply before disconnecting tubing or wiring. This is an OEM part sourced directly from the manufacturer.
CIRCULATION PUMP – Part Number: W11542868
$79.80
In Stock
CIRCULATION PUMP
★★★★★
★★★★★
(2)
Part #W11542868
The ice maker uses this OEM drain pump to remove water from its reservoir during flushing. It is rated 12V AC, 13W, and 60Hz. Check compatibility using the appliance model number. Disconnect power before installation and wear work gloves.
Ice Maker Screw – Part Number: WP3400884
$7.47
Special Order
Ice Maker Screw
Part #WP3400884
Screw size is 8-18 x 5/8". Used with stand-alone ice cube makers.
Adhesive Cement – Part Number: WP4317852
No Longer Available
Adhesive Cement
Part #WP4317852
Also known as Alumilastic Cement.

Common Symptoms of the 10689592102

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door switch module wore out
40 of 55 people found this instruction helpful.
  • Fred from Oceanport, NJ
  • Easy
  • Less than 15 mins
  • Pliers
Pull out old module...
Remove 2 wires...
Tape to inside wall [don't want them to fall down into side panel]..

Order new switch..

Fed Ex pkg came on 2nd day..

Install wires on switch...
Press into opening...
Check door light on..[OK]
.. Done
Was this helpful?
Thank you for voting!
Water not refilling after initial batch of ice
19 of 20 people found this instruction helpful.
  • Jonathan from WILLIAMSBURG, VA
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers
The water filled on startup (actually over-filled, which was a clue). After that water was used to make ice, no new water came in so the recirculation pump just made whining noises in the mostly empty reservoir. Since water could come in (on start up) I reasoned it wasn't the water inlet valve, and everything else suggested the ice maker was getting inaccurate info about how much water was in the reservoir. Turns out, the water recirculation pump has a water level sensor built in. So while the pump itself still functioned, the water level sensor inside had gone bad. Replacing the pump fixed the issue. There are videos online that show how to accomplish that, but it was pretty straight-forward. The dis-assembly was sometimes irritating because it's hard to see and maneuver around inside. It'll help if you put the machine closer to eye level. Pay close attention to videos that show the disassembly because there are a couple of tabs that are hard to find.
Was this helpful?
Thank you for voting!
Ice bin overfilling
16 of 21 people found this instruction helpful.
  • Travis from N CHESTERFLD, VA
  • Very Easy
  • Less than 15 mins
  • Nutdriver
I'm an hvac/r technician, and regularly work on ice machines. Begin my pulling the white over beneath the control panel. It snaps in place so pull on the bottom then left out. 1/4 nut driver is all you need, and remove the screw holding the bin thermistor clip to the side. Up to the right , beneath the control panel, behind the plasti c panel you previously removed is the mollex connector. Unplug the thermistor and follow instructions in reverse to reinstall.
Was this helpful?
Thank you for voting!