EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

10689582705 Kenmore Ice Maker - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Condenser Fan Motor Kit – Part Number: W10124096
$82.05
In Stock
Condenser Fan Motor Kit
★★★★★
★★★★★
(51)
Part #W10124096
This condenser fan motor kit includes a motor, fan blade, wire harness, and screws. Used in a refrigerator, the condenser fan motor moves the condenser fan blade to direct and move air across the condenser coil. Please note: The manufacturer has changed the appearance of the product from the original. The kit still functions the same as the original part. It is an OEM factory replacement. Make sure to unplug the refrigerator from the power source and wear gloves to protect your hands. Also, a helpful tip is to store food to prevent deterioration when the power is off.
Affresh Ice Machine Cleaner – Part Number: W11179302
No Longer Available
Affresh Ice Machine Cleaner
★★★★★
★★★★★
(3)
Part #W11179302
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly, turn off your ice machine and remove the existing ice left in your ice machine. Next, drain the water from your ice machine. Empty the entirety of this cleaner into the empty water pan and activate the cleaning cycle, and once the cycle is complete and you drain the pan again, the cleaning is complete!
PUMP – Part Number: W11566405
$75.58
In Stock
PUMP
★★★★★
★★★★★
(8)
Part #W11566405
For an ice maker to form ice, water circulates over the evaporator plate. This OEM recirculating pump moves that water and is rated at 12 V, 60 Hz, and 13 W. Check your appliances model number to confirm compatibility. Disconnect power and wear work gloves before installation.
Thermistor – Part Number: WPW10503764
$73.04
In Stock
Thermistor
★★★★★
★★★★★
(12)
Part #WPW10503764
Monitor when stored ice reaches capacity with this ice maker bin temperature sensor. Its electrical resistance changes with temperature, providing feedback to the control board. When accumulated ice cools the sensor, the system can pause production until more storage space is available. A faulty sensor may cause overflowing or stop ice production before the bin is full. Replacing a failed thermistor helps restore accurate bin temperature feedback. Disconnect appliance power before installation, secure the wiring connector, and return the sensor to its designated mounting position. This is an OEM part sourced directly from the manufacturer.
Door Light Switch – Part Number: WP2149705
$44.23
In Stock
Door Light Switch
★★★★★
★★★★★
(16)
Part #WP2149705
The purpose of the light switch in your refrigerator is to automatically turn on the light when the door is opened. If the light does not come on automatically when you open the door, the contacts inside the light switch may be burned out, meaning it is time to replace the switch. This package contains both the new light switch and a small plastic spacer. To complete this repair, you will need to remove the control panel section of your refrigerator. The only tools you will require for this repair are a 1/4-inch nut driver and maybe a small flat blade screwdriver. Be sure to disconnect the power source from the refrigerator before completing this repair.
Complete Ice Cutter Grid Assembly – Part Number: WP2313637
$163.15
In Stock
Complete Ice Cutter Grid Assembly
★★★★★
★★★★★
(14)
Part #WP2313637
The 1-inch squares on this 15-inch OEM cutting grid cut an ice slab into cubes. It is for a freestanding ice maker, so confirm compatibility with your appliance model. Disconnect power before installation, wear work gloves, and reconnect the cutter-grid harness correctly.
Ice Cutting Grid Wire – Part Number: 4387020
$49.50
In Stock
Ice Cutting Grid Wire
★★★★★
★★★★★
(7)
Part #4387020
This ice cutting grid wire separates sheets of ice into cubes in compatible ice makers. The kit contains approximately 10 feet of wire and eight mounting screws. Two kits are needed to replace the wires running in both directions of the grid. A broken wire may leave an ice sheet sitting on the grid without being cut into cubes. Inspect the wire and check the grid harness connection when this happens, since a loose connection can cause similar problems. Follow the kit instructions for fitting and securing the replacement wire. This is an OEM part sourced directly from the manufacturer.
Refrigerator Screw – Part Number: WP8281196
$9.62
In Stock
Temperature Sensor – Part Number: WPW10548509
No Longer Available
Temperature Sensor
★★★★★
★★★★★
(7)
Part #WPW10548509
This is a temperature sensor. It may also be known as an ice maker sensor and is used in conjunction with your ice machine. This piece is roughly 3.5 inches long, almost 2.5 inches wide, and includes the necessary wiring connector. You will find this part located in the water pump area of the ice cube maker. The function of this part is to determine the water level within the water reservoir. Once the water level reaches a certain point, the sensor will signal the controls to fill the reservoir.
Ice Maker Pump – Part Number: W11566407
$75.04
In Stock
Ice Maker Pump
★★★★★
★★★★★
(3)
Part #W11566407
During flushing, an ice makers reservoir drain pump removes water from the reservoir. This OEM part has a multi-pin electrical connector. Confirm fit against your ice makers model and disconnect power before installation.
Ice Maker Drain Fastener Cap – Part Number: WP2185696
$34.74
In Stock
Ice Maker Drain Fastener Cap
★★★★★
★★★★★
(4)
Part #WP2185696
This is a drain fastener cap and is used in conjunction with your freezer/refrigerator. This model is almost 1.5 inches in diameter, half an inch thick, and is white in color. This piece will fasten to the bottom of the water pan in your ice maker. It keeps the water in the water pan from leaking into your appliance. If your drain cap is loose or broken, the liquid from the water pan will empty and you will have no ice or very thin ice. Make sure when replacing this part to secure the drain cap tightly.
Ice Maker Water Distributor Tube – Part Number: W10863947
$51.61
In Stock
Ice Maker Water Distributor Tube
★★★★★
★★★★★
(1)
Part #W10863947
The water distributor tube distributes water from the reservoir to the evaporator plate.

Common Symptoms of the 10689582705

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Seven year old condenser fan was making noise when it was running.
199 of 211 people found this instruction helpful.
  • Josue from Jacksonville, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The process to repair was very simple, I removed the back of the refrigerator to expose the motor area. I then removed three screws that held the condenser motor in place. once it was loose I detactched the electrical harness and removed the old motor. I then placed the new motor in place and secured it with the screws and reattached the new electrical harness that came with the new part. Once completed I reviewed it to make sure I didn't miss anything. I then replaced the cover over the motor area and enjoyed my success in repairing my own appliance with no added cost for labor, which would have been expensive I'm sure. The part purchased came with clear and consice instructions very easy to follow.
Was this helpful?
Thank you for voting!
Broken light switch
82 of 134 people found this instruction helpful.
  • Randy from Hays, KS
  • Really Easy
  • 15 - 30 mins
  • Socket set
Took all the screws out of the plastic shroud that encloses the switch .There only four that I needed to remove, were the two in front where the switches that go,they go in horizontally and two in the back with large washers on them that hold the back to the top of the box that go in vertically.The switch was a snap ( make that two snaps ) the wiring is almost self explanatory. then it gos back to the way you took it off. OH! and don't forget to turn the light bulb all the way back in to the socket , so the light will work after you take the time to install it yourself.I had the water supply line from under the box to the water dispenser in the door and the total bill on that was one hundred thirty seven and a hand full of change.Don't be afraid to do it yourself the savings is enough on one one item to make several months payments on a new one Randy the "Handy Man'
Was this helpful?
Thank you for voting!
Fridge made noise and the center post was HOT!
54 of 60 people found this instruction helpful.
  • David from Jefferson City, MO
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
We have a side-by-side fridge/freezer and we experienced a hot center post (where doors come together) and the fridge made loud noise. Also, the (old) fan motor would start, but then quit, so our issue was the motor.

For me the repair was very easy, but for an unexperienced person it may prove to be difficult. If you must o rder a motor/fan, do NOT order the metal fan as a plastic fan comes with the motor. What's strange is the new motor is different than the old one, but it still mounted without any required modifications. I did NOT use the wire harness that came with the motor either as it was different too, but my old one was still good.

Check all of your parts as my fan had a cracked blade, but I used "superglue" and it's fine now.

Fridge stays cold and my wife had to lower the temperature in the fridge as she was blasted by the cold!
Was this helpful?
Thank you for voting!