My Orders
106172 Craftsman Compressor - Overview
Models starting with 106172
Click on the best match to narrow your results.
- 106172090 Craftsman Compressor (Single Cylinder Tank Type Air Compressor)
- 106172180 Craftsman Compressor (Single Cylinder Tank Type Air Compressor)
- 106172340 Craftsman Compressor (One Cylinder Tank Type Air Compressor)
- 106172341 Craftsman Compressor (One Cylinder Tank Type Air Compressor)
- 106172342 Craftsman Compressor (Single Cylinder Tank Type Air Compressor)
- 106172343 Craftsman Compressor (Single Cylinder Tank Type Air Compressor)
- 106172440 Craftsman Compressor (Single Cylinder Tank Type Compressor)
- 106172441 Craftsman Compressor (Single Cylinder Tank Type Compressor)
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$7.31
Special Order
DRAIN VALVE
Part #N286039
Frequently referred to as a Drain Plug, this Drain Valve is used to drain any condensation that has collected inside the tank to prevent the tank from rusting. It is not part of a kit or assembly, is sold individually, made of brass, is gold, and will be found at the bottom of the air tank.
This part will need to be replaced when it is ...Read moreno longer able to provide a proper seal, or if it is visibly worn or damaged. You will need a wrench to complete this repair.
Customers rate this repair as Easy.
Read less
$6.40
In Stock
Ferrule
Part #ST085200AV
Designed for use in compressors, this genuine replacement part is used to provide a seal and prevent leaks. It is red, made of rubber, is not part of a kit or assembly, and is sold individually.
When this part is worn, you will notice leaks from your machine, and it will need to be replaced. As with most rubber seals, this part is known...Read more to wear with regular use of your compressor, and will no longer be able to properly seal when it needs to be replaced. It is found at the bottom of the air tank, and you will need a wrench to complete this repair.
Customers rate this repair as Easy.
Read less
$20.76
On Order
Flapper Valv
Part #VS001800AV
This is an authentic part that is supplied directly from the original equipment manufacturer for use with Craftsman Air Compressors. The exhaust flapper valve attaches on the valve plate under the cylinder head. The most common reasons for replacing the flapper valve is if there is poor performance, or the air leaks out of the intake air ...Read morefilter while the unit is running, damaged/sticking valves is a common issue when you have low compression, and can also cause the motor/engine to stall and too much pressure in the pump's crankcase. This part is sold individually. Here is a list of tools that are needed to install the flapper valve are a screwdriver, socket wrench, and a wrench.
Read less
$67.62
In Stock
Flapper Valve .015 Thick
Part #VS001801AV
This replacement flapper valve is a high quality item that is sourced from original equipment manufacturer for use with Campbell Hausfeld air compressors. This part is secured under the cylinder head helping to control the fuel-air mixture admitted to the cylinder. As the piston rises in the cylinder a vacuum is created in the crankcase b...Read moreeneath the piston. This part is made from durable metal and it is sold individually.
Read less
No Longer Available
Table Saw Pulley
Part #STD328022
$35.72
In Stock
Asme Safety Valve
Part #V-215100AV
This ASME safety valve is constructed of high-qualty metal, and is made for use with many air compressor models. Fastened to the manifold, the safety valve diminishes air pressure when the pump is not shut off at the proper setting. This important component is sold individually. A screwdriver, adjustable wrench and a pair of pliers are of...Read moreten necessary for the removal and replacement. Please refer to the specific manual for additional repair information.
Read less
$119.00
In Stock
Handle
Part #HL001801BH
This handle is an original replacement part supplied by the manufacturer. It is commonly used in Campbell Hausfeld air compressors. It is compatible with over 150 models. This handle is attached to the top of the tank (part AR040500CG). A screwdriver is needed to remove and replace the screws that secure this part.
$6.40
In Stock
Plug-drain, Oil (sqh 1/4-18)
Part #27642
$6.40
In Stock
Self Tap Scr 5-40x1/4
Part #ST073231AV
This is an OEM part sourced directly from the manufacturer. The screw is commonly found in Craftsman compressors and paint sprayers. This part is made of metal, and is generally used to secure the flapper valves in the cylinder head. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be ...Read moresure of ordering the correct part. You will require a screwdriver when replacing this item. The screw is provided as an individual replacement part.
Read less
$15.64
In Stock
Oil Seal
Part #ST021600AV
This is an authentic manufacturer sourced replacement part which is specially designed for use with Campbell Hausfeld Air Compressors. The purpose of the oil seal is to prevent oil from leaking between the crankshaft and crankcase opening. When replacing this part make sure that the compressor is unplugged and the air is bleed from the ta...Read morenk. This part is made from high-quality rubber material and is sold individually.
Read less
$40.32
On Order
Compression Connector Assembly
Part #ST018300AV
This is a genuine OEM part. The compression connector assembly is made by Campbell Hausfeld, and is compatible with many air compressor devices. The metal component secures the manifold to the compressor tank. This item is sold individually. A screwdriver and a pair of pliers are often helpful in making the replacement.
$163.74
In Stock
Pressure Switch Kit
Part #CW212600SJ
This authentic replacement part is designed for Campbell Hausfeld air compressors. It is sourced directly from original equipment manufacturer and it is sold individually. The pressure is build in such a way that it will let your compressor know when to stop and when to start building up pressure. There are different reasons a pressure sw...Read moreitch could be leaking air, however if it is the pressure switch should be replaced immediately. To complete this repair you will need: a wrench set, a nut driver set and a thread-sealing tape.
Read less
Exact Part matches for your search term
No Longer Available
No Longer Available
Common Symptoms of models starting with 106172
How this model fails, and the parts that fix it.
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More