106153970 Craftsman Paint Sprayer - Parts

Frequently referred to as a Drain Plug, this Drain Valve is used to drain any condensation that has collected inside the tank to prevent the tank from rusting. It is not part of a kit or assembly, is sold individually, made of brass, is gold, and will be found at the bottom of the air tank. This part will need to be replaced when it is ...Read moreno longer able to provide a proper seal, or if it is visibly worn or damaged. You will need a wrench to complete this repair. Customers rate this repair as Easy.

This is an authentic part that is supplied directly from the original equipment manufacturer for use with Craftsman Air Compressors. The exhaust flapper valve attaches on the valve plate under the cylinder head. The most common reasons for replacing the flapper valve is if there is poor performance, or the air leaks out of the intake air ...Read morefilter while the unit is running, damaged/sticking valves is a common issue when you have low compression, and can also cause the motor/engine to stall and too much pressure in the pump's crankcase. This part is sold individually. Here is a list of tools that are needed to install the flapper valve are a screwdriver, socket wrench, and a wrench.

This is an authentic OEM sourced item that is specially designed for use with Craftsman air compressors. It is an identical replacement for a missing or worn belt that drives the unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable rubber and is sold individually.

This part is an OEM from Campbell Hausfeld for use with air compressors. The air filter cleans the air entering the air compressor. The most common reason for replacing the filter is if it is dirty. This part is made out felt and is sold individually. There are no tools needed to replace the filter.

This is the genuine OEM supplied replacement part that is used on Campbell Hausfeld air compressors. A gasket is a mechanical seal which fills the space between the cylinder and the cylinder head. It is recommended to replace gaskets when replacing the cylinder or doing a maintenance repairs on the unit to ensure proper seal. Over time th...Read moree material may get compressed and crack eventually requiring replacement. Please note this durable composite material gasket is sold individually.

This is an OEM part sourced directly from the manufacturer. The screw is commonly found in Craftsman compressors and paint sprayers. This part is made of metal, and is generally used to secure the flapper valves in the cylinder head. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be ...Read moresure of ordering the correct part. You will require a screwdriver when replacing this item. The screw is provided as an individual replacement part.

This is an authentic manufacturer sourced replacement part which is specially designed for use with Campbell Hausfeld Air Compressors. The purpose of the oil seal is to prevent oil from leaking between the crankshaft and crankcase opening. When replacing this part make sure that the compressor is unplugged and the air is bleed from the ta...Read morenk. This part is made from high-quality rubber material and is sold individually.

This is a genuine OEM part. The compression connector assembly is made by Campbell Hausfeld, and is compatible with many air compressor devices. The metal component secures the manifold to the compressor tank. This item is sold individually. A screwdriver and a pair of pliers are often helpful in making the replacement.

This is an authentic part is sourced directly from the original equipment manufacturer. The bearing cap gasket is commonly found in Craftsman air compressors. The purpose of this component is to provide a tight seal between connected parts. Please check the appropriate diagrams of your model for the exact location and the correct application of this part. Note, one durable cap gasket is included.

This is a genuine replacement part sourced directly from the manufacturer. The gasket is commonly found in Craftsman air compressors and paint sprayers. This part is made of flexible plastic, and is used to seal the connection between components in the cylinder head. You may require a screwdriver when replacing this item. The gasket is sold as an individual replacement part.

This part is an OEM from Campbell Hausfeld for use with Air Compressors. The check valve lets pressurized airflow into the tank and prevents air from flowing back into the pump. The most common reason for replacing the check valve is if it is stuck open. This part is sold individually. The tools that you will need to replace the check valve is an adjustable wrench and a 7/16 wrench.