10581-3 General Electric Range Parts & Repair Help | PartSelect
Models > 10581-3

10581-3 General Electric Range - Overview

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(23)
PartSelect #:PS244399
Manufacturer #:WB31T10015
This part is located beneath the element and catches any spills.
$9.11
In Stock
(1)
PartSelect #:PS244398
Manufacturer #:WB31T10014
This burner bowl is also known as a burner drip bowl or burner drip pan, and is designed for use with your cooktop or range. It is black in color and is approximately 6 inches in d...
$7.66
In Stock
(4)
PartSelect #:PS236043
Manufacturer #:WB21X5301
It is possible that your oven is cold because of a fault in the temperature sensor. The temperature sensor regulates oven temperature in modern ranges, like a thermostat. It is on ...
$105.34
In Stock
(6)
PartSelect #:PS247415
Manufacturer #:WB36X192
This light bulb lens covers the interior light bulb in an oven, range, or stove. No tools are necessary to replace this part. Simply slide off the wire bracket to remove the existi...
$7.31
In Stock
(6)
PartSelect #:PS232127
Manufacturer #:WB15X10048
Handle only. Screws not included.
$54.90
In Stock
PartSelect #:PS217532
Manufacturer #:40A15
$5.97
In Stock
PartSelect #:PS234480
Manufacturer #:WB1X119D
$9.78
In Stock
(2)
PartSelect #:PS247548
Manufacturer #:WB36X5712
This inner door glass is sold individually.
$136.19
In Stock
PartSelect #:PS242986
Manufacturer #:WB2X8248
No Longer Available
PartSelect #:PS256617
Manufacturer #:WB7X7187
$7.52
In Stock
Questions and Answers for 10581-3
Be the first to ask our experts a question about this model!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven tempature was approximately 150 degrees to low

Oven Sensor – Part Number: WB21X5301
  • Customer: James from Austin, TX
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Nutdriver, Screw drivers
  • 210 of 241 people found this instruction helpful
This repair is EASY if you know how to use an ohm meter. If not, seek help for this step.

SYMPTOM:
The oven (JKP27WOP3WG or JKP27WP3WG and many ovens like it ) was not getting hot enough. Verifying the cooking temperature with an typical oven thermometer, I was able to determine that the oven was cooking temperature was about 150 degrees t... read more

Oven would not heat to the correct temperature

Oven Sensor – Part Number: WB21X5301
  • Customer: Michael from Lawrenceville, GA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 37 of 60 people found this instruction helpful
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires read more

F2 error message on my GE oven indicated need for new heat sensor

Oven Sensor – Part Number: WB21X5301
  • Customer: Joseph from Brick, NJ
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers
  • 21 of 23 people found this instruction helpful
After unscrewing the old heat sensor from inside the oven, I pulled the range away from the wall, got behind it and removed the small panel over the heat sensor. Naturally, the plastic clips connecting the heat sensor to the range wiring wouldn't come apart, so I eventually had to simply pry them apart with two pliers. Then, naturally, the new plastic connec... read more