Models > 1053B1A

1053B1A Roper Wall Oven - Overview

Sections of the 1053B1A

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Hex Nut – Part Number: WP112432
Hex Nut
PartSelect #: PS11738304
Manufacturer #: WP112432
This 10-32-inch hex nut works with multiple appliances in your home as a fastener. This specific model is sold individually. Hex nuts usually have 6 even sides and together they are used with bolts an...
  In Stock
SWTCH-LITE – Part Number: 8189867
PartSelect #: PS392518
Manufacturer #: 8189867
  No Longer Available
HNDLE-DOOR – Part Number: 3169105
PartSelect #: PS337143
Manufacturer #: 3169105
  No Longer Available
DISCONTINUED – Part Number: 814289
PartSelect #: PS389161
Manufacturer #: 814289
  No Longer Available
Raceway-Igniter Wire – Part Number: 307429
Raceway-Igniter Wire
PartSelect #: PS74324
Manufacturer #: 307429
  No Longer Available
DISCONTINUED – Part Number: 689977
PartSelect #: PS883177
Manufacturer #: 689977
  No Longer Available
Wire Harness-Main – Part Number: 307954
Wire Harness-Main
PartSelect #: PS582472
Manufacturer #: 307954
  No Longer Available
Repair Parts Manual – Part Number: LIT328031
Repair Parts Manual
PartSelect #: PS582473
Manufacturer #: LIT328031
  No Longer Available
Operating Guide – Part Number: LIT324132
Operating Guide
PartSelect #: PS582474
Manufacturer #: LIT324132
  No Longer Available
Installation & Reference Guide – Part Number: LIT324131
Installation & Reference Guide
PartSelect #: PS582475
Manufacturer #: LIT324131
  No Longer Available
Gas Care & Use Guide – Part Number: LIT324000
Gas Care & Use Guide
PartSelect #: PS582476
Manufacturer #: LIT324000
  No Longer Available

Questions And Answers for 1053B1A

Be the first to ask our experts a question about this model!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
light wont come on
Well, when you put the back cover on and screw it down make sure you have nothing touching the white wire leading to the oven light. I did and it blew the push switch when I threw the 220 breaker. Actually, the light was on when I came in the room, but when I pushed the switch on the front panel it sparked in the rear and popped the breaker. Then I saw the short and when I tested the switch it would not click. The install was fine.
Parts Used:
  • James from Fort Collins, CO
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Wrench set
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!