10475 Dynabrade Sander Polisher - Overview

Genuine Dynabrade replacement part, this item is sold individually. The purpose of the 56027 Muffler is to lessen the noise of the air coming from the exhaust of the tools listed below. It will also filter out the excess oil that is in the tool. Once these Inserts get dirty and clogged they should be replaced.

This is an authentic OEM component from Dynabrade. The plastic muffler cap is compatible with many sander devices. Fitted in the muffler assembly, the part secures the muffler insert. This part is made to help decrease the exhaust noise and capture any excess oil. The muffler cap is sold individually. A wrench and a screwdriver may be needed for the installation.

This is a genuine Dynabrade replacement part for use in sanders. The snap ring fits between the o-ring and the housing. It might require a set of pliers to replace this part if it becomes broken or bent. This item is made of metal and is sold individually.

This is a genuine OEM sourced part which is specially designed for Dynabrade orbital sanders. The speed regulator provides a user with a comfortable grip to adjust the speed. It is an identical replacement for a missing or a damaged part that was installed on a new unit. This high-quality speed regulator is made of durable material and is...Read more sold as an individual item. Make sure to refer to the appropriate diagrams for your model to ensure the proper repair procedure.

This is a replacement lock ring is specially made for use with Dynabrade power tools. It is designed to create a seal between two connected parts. Over time o-rings will become brittle allowing for air leaks. Because of this rings should be inspected periodically. If parts are showing signs of wear they should be replaced. This is a rubber o-ring and it is sold individually.

This is a manufacturer sourced replacement seal. It is specially produced for use with Dynabrade sanders. This is one of the seals for the tip valve/inlet bushing. Over time seals tend to shrink and crack allowing for air leaks. At that time it should be replaced to maintain top performance. It is made out of rubber material and it is sol...Read mored individually. Replacing this item you would need a wrench to replace this item.

This an authentic Dynabrade replacement part used in buffers and sanders. The spring is used to absorb shock from the valve when tool is in use. It goes between the air control ring and the tip valve. A wrench may be needed to properly install this part. This item is available as an individual replacement part.

This is a genuine OEM part. The Dynabrade tip valve is manufactured for use with orbital sanders, finishers and grinders. This metal and plastic valve often sits in the air inlet bushing, and is supported by a spring. The valve is sold individually, please see specific manual for additional repair information. A pair of pliers, wrench and a screwdriver may be necessary for installation.

This is a genuine item that is supplied by the original equipment manufacturer for use with Dynabrade orbital sanders. It is an identical replacement for a missing or a faulty muffler body that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this ...Read morecomponent. Keep in mind this high-quality muffler body is made of durable material and is sold individually. Note, the #57065 Cone Muffler is sold separately.