10351 - Overview

This is an authentic manufacturer-sourced component which is specially designed for use with Dynabrade sanders. The purpose of this muffler is to reduce the noise coming from a working unit, unfortunately, over time it will wear out and it may begin to fail eventually requiring a replacement. Keep in mind this high-quality cone muffler is...Read more sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware.

This heavy-duty pull chain switch is designed for industrial and commercial air circulators, providing reliable 2- or 3-speed control. Built with a durable plastic housing and brass chain knob, it operates on 115V AC and is rated for 6A at 125V or 3A at 250V. The SP3T configuration allows Off/On/On/On functionality, making it ideal for Ai...Read morermaster and Dayton fans. Includes a 4-inch chain, brass nut, and extension string for easy installation. Push-in terminals accommodate four wires for secure connections.

Genuine Dynabrade replacement part, this item is sold individually. The purpose of the 56027 Muffler is to lessen the noise of the air coming from the exhaust of the tools listed below. It will also filter out the excess oil that is in the tool. Once these Inserts get dirty and clogged they should be replaced.

This is an authentic OEM component from Dynabrade. The plastic muffler cap is compatible with many sander devices. Fitted in the muffler assembly, the part secures the muffler insert. This part is made to help decrease the exhaust noise and capture any excess oil. The muffler cap is sold individually. A wrench and a screwdriver may be needed for the installation.

This is a manufacturer sourced replacement seal. It is specially produced for use with Dynabrade sanders. This is one of the seals for the tip valve/inlet bushing. Over time seals tend to shrink and crack allowing for air leaks. At that time it should be replaced to maintain top performance. It is made out of rubber material and it is sol...Read mored individually. Replacing this item you would need a wrench to replace this item.

This an authentic Dynabrade replacement part used in buffers and sanders. The spring is used to absorb shock from the valve when tool is in use. It goes between the air control ring and the tip valve. A wrench may be needed to properly install this part. This item is available as an individual replacement part.

This is a genuine OEM part. The Dynabrade tip valve is manufactured for use with orbital sanders, finishers and grinders. This metal and plastic valve often sits in the air inlet bushing, and is supported by a spring. The valve is sold individually, please see specific manual for additional repair information. A pair of pliers, wrench and a screwdriver may be necessary for installation.

It is a genuine OEM part that is designed for Dynabrade grinders and sanders. The valve stem is an important component that connects to the speed regulator assembly. It provides an identical replacement for a damaged or a missing part that was installed on a new unit. Check the owner's manual and the diagrams for your model to ensure the ...Read moreproper repair procedure. Keep in mind this high-quality valve stem is made of durable metal and is sold as an individual item. A screwdriver, a wrench set, and pliers might be needed to replace this part.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Dynabrade sanders. It is an identical replacement for a missing or faulty inlet bushing that the compressor hose would connect to, please make sure to refer to the appropriate diagrams of your model for the correct location and applicati...Read moreon of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.