1034348610 Kenmore Cooktop - Overview

Diagrams for 1034348610

See every part. Know exactly what you need.

Parts for the 1034348610

$21.45

Drip Bowl - 6 Inch

★★★★★

(27)

Part #WB32X107

The drip bowl on your range is designed to catch any spills that may occur when cooking. This drip bowl is chrome in color and is 6 inches in diameter. The chrome drip bowl is intended for use with rolled, terminal-style plug-in surface element units. The drip bowl is located beneath the surface element, so you will need to remove the ele...Read more

Read less

$25.75

Drip Bowl - 8 Inch

★★★★★

(15)

Part #WB32X106

Drip bowls are located under the heating elements and catch grease and spills that come from cooking on your stove top. If your drip bowl is damaged or rusted, it could allow grease to drip inside your range. This 8 inch chrome drip bowl fits most electric ranges. Before you replace your damaged drip bowl, make sure the element is turned ...Read more

Read less

$53.20

Range Infinite Heat Switch Kit

★★★★★

(16)

Part #WB21X36771

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

$74.79

Surface Burner Terminal Block Kit

★★★★★

(7)

Part #WB17X210

This is a surface burner terminal block kit, also known as range surface element receptacle, for an oven, range, or stove. The kit comes with the terminal block, mounting clip, and wires. This surface burner terminal block kit connects the wiring harness to the surface elements. It is important to shut off the power to the appliance befor...Read more

Read less

$16.05

Screw

★★★★★

(2)

Part #WB1X1130

Sold Individually.

$16.07

"8"" TRIM RING "

Part #WB31K5049

MEDALLION

Part #WB4X122

"6"" TRIM RING "

Part #WB31K5044

$20.37

CONTROL SEAL

Part #WB6X3

$32.63

PAN-LARGE

Part #329943

$15.00

Screw

Part #WB1X1425

$24.67

6 INCH PORCELAIN GRAY BU

Part #WB31K5045

Common Symptoms of the 1034348610

How this model fails, and the parts that fix it.

Element will not heat

Fixed by
these parts

Show All

Videos related to the 1034348610

Watch our pros, then fix it yourself.

Replacing the Surface Burner Terminal Block Kit

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

There was no heat on the coils.

48 of 52 people found this instruction helpful.

Shaohui from East Lansing, MI
Easy
15 - 30 mins
Pliers

I opened the lid, and found that the terminal blocks were burnt, the wires were melted. I ordered one set of terminal block to replace the burnt one, and it worked. Before I started, I shut off the electricity in the whole house to be safe.

Was this helpful?

Large burner would operate on high setting only.

22 of 28 people found this instruction helpful.

Ernest from Bellevue, NE
Really Easy
15 - 30 mins
Pliers, Socket set

1. Removed the back panel.
2. Disconnected the wires from the old switch while connecting wires to the new switch one at a time.
3. Installed the new switch and broke off the excess metal on the post which fits into the burner knob on front of the range.
4. Replaced the burner knob and replaced the back panel.

Was this helpful?

Surface burner coil did not work.

23 of 33 people found this instruction helpful.

Gregory from Mont Belvieu, TX
Easy
30 - 60 mins
Nutdriver, Screw drivers, Socket set

TURN OFF ALL POWER TO KITCHEN. Took off all burner coils and plates below them. Lift hood. Locate part. Remove old part and replace with new part in same way as was previously installed. The wire that comes with the kit is actually too much wire, but just arrange it the best you can and leave it....no big deal. I didn't have a magnet ... Read more

Read less

Was this helpful?