10322 - Overview

With this three-wire high limit/safety thermostat a dryer's heating element will cut out if the internal temperature reaches 290 degrees Fahrenheit. The element will kick back in when the temperature drops to 250 degrees Fahrenheit.

This is an authentic replacement part manufactured for use with lawnmower engines. The special gear is connected to the armature of the starter motor and drives the flywheel which spins past the ignition coil creating the charge that is sent to the spark plug. This gear is sold as an individual replacement part.

This is an authentic Toro replacement part that has been sourced from the original manufacturer to be used with lawnmowers. The gasket is used to seal the connection between the crankcase and the crankcase cover. This item is available as an individual replacement part.

This is an authentic manufacturer-sourced component which is specially designed for use with Dynabrade sanders. The purpose of this muffler is to reduce the noise coming from a working unit, unfortunately, over time it will wear out and it may begin to fail eventually requiring a replacement. Keep in mind this high-quality cone muffler is...Read more sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware.

This replacement washer is supplied by the original equipment manufacturer for use with Craftsman equipment. It helps to distribute the pressure evenly and provide a tight seal between the connected pieces. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality pack includes eight durable metal washers.

This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with air compressors. The hex head screw is used to secure the motor assembly to the bracket on the tank of the compressor. These screws are sold in packs of eight pieces and the packs are sold individually.

Genuine Dynabrade replacement part, this item is sold individually. The purpose of the 56027 Muffler is to lessen the noise of the air coming from the exhaust of the tools listed below. It will also filter out the excess oil that is in the tool. Once these Inserts get dirty and clogged they should be replaced.

This is an authentic OEM component from Dynabrade. The plastic muffler cap is compatible with many sander devices. Fitted in the muffler assembly, the part secures the muffler insert. This part is made to help decrease the exhaust noise and capture any excess oil. The muffler cap is sold individually. A wrench and a screwdriver may be needed for the installation.

This is an authentic manufacturer-supplied component which is designed for Craftsman equipment. It is a standard hardware which may have multiple applications. This is an identical replacement for a missing or a damaged part that was installed on a new unit. Check the diagrams for your model to ensure the exact location and use of this sc...Read morerew. Keep in mind it is made of durable metal and is sold in a pack of five. An Allen wrench will be needed secure or remove it.