10281 - Parts

This part is an OEM from Dynabrade. The speed regulator is made for use with many orbital sander devices. This item holds the valve stem in the housing assembly, and is sold individually. The plastic regulator manages the airflow, controlling the sander speed. You will need a pair of pliers for the installation.

This is a manufacturer sourced replacement seal. It is specially produced for use with Dynabrade sanders. This is one of the seals for the tip valve/inlet bushing. Over time seals tend to shrink and crack allowing for air leaks. At that time it should be replaced to maintain top performance. It is made out of rubber material and it is sol...Read mored individually. Replacing this item you would need a wrench to replace this item.

This an authentic Dynabrade replacement part used in buffers and sanders. The spring is used to absorb shock from the valve when tool is in use. It goes between the air control ring and the tip valve. A wrench may be needed to properly install this part. This item is available as an individual replacement part.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Dynabrade sanders. It is an identical replacement for a missing or faulty inlet bushing that the compressor hose would connect to, please make sure to refer to the appropriate diagrams of your model for the correct location and applicati...Read moreon of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is a genuine Dynabrade replacement part manufactured for use with orbital sanders, and grinders. This special valve sits in the air inlet bushing, and is supported by a spring. The valve is sold individually, please see model diagram for additional parts that are available separately.

This replacement lock washer is supplied directly from the original equipment manufacturer, it is specially produced for use with Dynabrade sanders. It helps to distribute the pressure between connected pieces ensuring a tight fit. This is a standard hardware which has multiple applications based on your model, for proper location and use...Read mores please refer to appropriate diagrams of your unit. This part is made of high-quality metal and it is sold individually.

This is a genuine manufacturer-supplied component which is specially made for use with Dynabrade sanders. It is an identical replacement for a missing or faulty screw that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality screw is made of durable metal and is sold individually.

This genuine Dynabrade replacement part is used in various power sander models. An O-ring is made to act as a flexible part connecting solid pieces, sealing and retaining pressure inside. Assorted styles of O-ring are often used in more than one spot in a machine, so ensure that the right one is being used for the right place. This item is sold individually.

This is an authentic Dynabrade replacement part manufactured for use with sanders. The Key is used connect the motor shaft and rotor assembly. This key fits into the slot on the motor shaft and aligns with the keyway in the arbor of the rotor assembly. They key is sold as an individual replacement part.

This is a genuine Dynabrade replacement part designed for use with sanders/buffers. It fits inside the cylinder assembly. This set includes a plastic rotor and a set of five (5) blades. To replace it you will need a screwdriver and pliers.