1025 - Overview

This manufacturer-certified Primer Bulb is a black rubber part which comes individually sold. It is used to pump fuel from the fuel tank to the carburetor to start the engine. Installation is rated as "Easy" by customers, and will require a screwdriver and pliers. The part attaches to the primer assembly. If the bulb breaks due to wear/fa...Read moretigue/damage you will see fuel leaking, and the part should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

The Shoulder Bolt is a 3/8-16 x 3-5/8 bolt, certified by the original equipment manufacturer. It is a metal bolt which is individually sold and comes in black. Installation requires a wrench or socket and is rated as "Easy" by customers. It is mostly used to keep the wheel in place. It fits onto the unit frame and if broken or removed, th...Read moree wheel will fall off. Refer to your make, model and diagram to ensure this is the correct part.

String trimmer spool with line.

The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has...Read more broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

This OEM-sourced washer in your walk-behind lawnmower provides space and protects the rear wheel from rubbing against the pivot arm assembly, ensuring smooth wheel rotation. A damaged washer may appear worn or cracked, causing the rear wheel to feel misaligned or wobble excessively. If not replaced, it can lead to increased wear and expen...Read moresive repairs. To remove the existing washer, prop up the wheel with a two by four, use a wrench to remove the bolt securing the wheel, slide out the wheel, and then remove the bolt on the rear adjuster to take off the washer. Please note that this washer is sold individually, so make sure to check the quantity needed for your machine before making your purchase.

This is an authentic manufacturer sourced replacement part designed for use with Toro snow throwers/blowers. This part helps to secure the primer bulb and connect the fuel hose. It is made out of plastic and it is sold individually.

The Handle (or Knob Handle) is a black, plastic part which is rated as "Easy" to install by customers. It attaches onto the handle, so you can quickly release to fold down the handle bar. If the part is visibly broken (due to wear/fatigue), it should be replaced. Refer to your make, model and diagram to check if this is the right part for you.

The blade within a lawn mower is one of the most important components, since it is what cuts the grass itself. This OEM blade is a high-lift blade made of high-quality metal and measures 21-inches in length and features 3 holes in its middle to attach to the spindle. Since this blade is high-lift, it is designed to cut the grass cleaner a...Read morend leave fewer clumps of grass behind and helps to generate more airflow within the mower deck. This blade is compatible with several different makes and models of lawnmower but is sold as an individual part without any securing hardware. If you notice that your blade is damaged, dull or warped, it will need to be replaced immediately. To replace this blade, you will need tools such as a socket wrench and it is recommended that you use gloves to prevent cutting your hands when installing the new blade. Put your mower on its side to prevent oil or fuel leakage, and then using a socket wrench, disconnect and remove the old blade carefully before cleaning the area and installing the new blade.

This is an authentic Toro replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The plastic pivot stop attaches to the upper handle and is used prevent the control bail from pivoting too far and breaking the cable. This item is available as an individual replacement part.

This item is has been OEM sourced to ensure a high level of quality. The metal throttle spring is intended to be used with lawnmower engines from Toro and Lawn-Boy. The throttle spring attaches to the carburetor under the airvane adjustment collar. This item is used to maintain the position of the throttle disc and to return it after the throttle is opened. This item is sold as a single part.

This replacement spark plug is an authentic OEM sourced part, not an aftermarket imitation. It is specially designed for use on Toro lawn and garden equipment. A spark plug delivers electric current from an ignition system to an internal combustion engine. This item is sold individually. You will need a spark plug wrench or a socket wrench to replace the spark plug.

This replacement hardware is sourced from original equipment manufacturer for use with Toro snowthrowers. It is standard hardware which has multiple applications, please refer to appropriate diagrams for correct location and use of this locknut. This part is made from durable metal and it is sold individually.