1023 - Overview

The Shoulder Bolt is a 3/8-16 x 3-5/8 bolt, certified by the original equipment manufacturer. It is a metal bolt which is individually sold and comes in black. Installation requires a wrench or socket and is rated as "Easy" by customers. It is mostly used to keep the wheel in place. It fits onto the unit frame and if broken or removed, th...Read moree wheel will fall off. Refer to your make, model and diagram to ensure this is the correct part.

This is a high quality replacement hardware that is specially manufactured for use on Toro lawn and garden equipment. Two of these screws are generally used to secure the belt guide to the mower deck. Please note this durable metal hex head taptite screw is included per order.

The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has...Read more broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

This OEM-sourced washer in your walk-behind lawnmower provides space and protects the rear wheel from rubbing against the pivot arm assembly, ensuring smooth wheel rotation. A damaged washer may appear worn or cracked, causing the rear wheel to feel misaligned or wobble excessively. If not replaced, it can lead to increased wear and expen...Read moresive repairs. To remove the existing washer, prop up the wheel with a two by four, use a wrench to remove the bolt securing the wheel, slide out the wheel, and then remove the bolt on the rear adjuster to take off the washer. Please note that this washer is sold individually, so make sure to check the quantity needed for your machine before making your purchase.

The Handle (or Knob Handle) is a black, plastic part which is rated as "Easy" to install by customers. It attaches onto the handle, so you can quickly release to fold down the handle bar. If the part is visibly broken (due to wear/fatigue), it should be replaced. Refer to your make, model and diagram to check if this is the right part for you.

The blade within a lawn mower is one of the most important components, since it is what cuts the grass itself. This OEM blade is a high-lift blade made of high-quality metal and measures 21-inches in length and features 3 holes in its middle to attach to the spindle. Since this blade is high-lift, it is designed to cut the grass cleaner a...Read morend leave fewer clumps of grass behind and helps to generate more airflow within the mower deck. This blade is compatible with several different makes and models of lawnmower but is sold as an individual part without any securing hardware. If you notice that your blade is damaged, dull or warped, it will need to be replaced immediately. To replace this blade, you will need tools such as a socket wrench and it is recommended that you use gloves to prevent cutting your hands when installing the new blade. Put your mower on its side to prevent oil or fuel leakage, and then using a socket wrench, disconnect and remove the old blade carefully before cleaning the area and installing the new blade.

This is an authentic Toro replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The plastic pivot stop attaches to the upper handle and is used prevent the control bail from pivoting too far and breaking the cable. This item is available as an individual replacement part.

This replacement hardware is sourced from original equipment manufacturer for use with Toro snowthrowers. It is standard hardware which has multiple applications, please refer to appropriate diagrams for correct location and use of this locknut. This part is made from durable metal and it is sold individually.

This is a genuine manufacturer-approved replacement locknut, it is commonly utilised on Toro lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this nut. It is a high-quality hardware which is made of durable metal and it is sold individually.

This manufacturer-certified Grass Chute is a black plastic part used to direct grass clippings. Installation is rated as "Easy" by customers, and requires a wrench or socket. The chute secures to the top of the cutting deck. If broken due to wear/fatigue/damage you will be able to see the issue, and should replace the part. Refer to your make model and diagram to ensure this is the correct part.

This authentic fan-mulching is supplied by the original equipment manufacturer for use with Lawn Boy lawn mowers. It is a special component which helps to agitate grass clippings under the deck. This is an identical replacement for a missing or a damaged part that was installed on a new unit. Refer to the appropriate diagrams for your mod...Read moreel for the exact location and the correct use of this fan-mulching. It is made of high-quality metal and is sold as an individual part. You would need a wrench to secure or remove this component.

This replacement screw is an authentic component which is supplied directly from the original equipment manufacturer for use with Toro lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please refer to appropriate diagrams for the correct location and use of this part. This hex head screw is made of high-quality metal and it is sold individually.

Sold individually.