1007-1 Milwaukee Electric Drill - Overview

Genuine Milwaukee replacement part, this item is sold individually. This Chuck Key tightens the jaws of the 1/2 inch capacity Chucks on all the Drill models shown below. For convenience a Chuck Key Holder part number 48-66-4040 can be ordered. It is attached to the power cord then the Chuck Key is attached to it.

Genuine Milwaukee replacement part Includes 1 Carbon Brush with wire lead and brush spring attached. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • 2 Required for a set. • New brushes can restore a motor's electric braking Carbon motor brushes are one of the mos...Read moret commonly replaced power tool components. • Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. • A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. • When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

This is a genuine Milwaukee replacement part, it is sold individually. The purpose of the 06-75-3150 Screw is to secure the chuck to the spindle of the models listed below. This is a left hand threaded screw, to remove it turn it clockwise. We do have an article and video on

This is an genuine OEM sourced replacement part used on Milwaukee electric drills/drivers and sawzalls. Switch is a crucial part of the tool which handles on/off operations. Because switches use mechanical internals, they will tend to wear out over time, eventually requiring replacement. It has a plastic body and it is sold individually. ...Read more To replace this switch you would need a Screwdriver. • First you want to remove screws used to secure two pieces of housing set • Disconnect wires from the old switch and remove it from the housing • Place the new switch in the housing and connect wires to it • Reassemble the housing

Genuine Milwaukee replacement part Includes 1 Carbon Brush sold individually. Please go to the schematic listings for your tool to find the brush assembly parts compatible with this carbon brush and your tool. This carbon brush will fit a wide variety of Milwaukee tools. • Worn brushes are frequently the cause of a poorly running moto...Read morer. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

This rubber, injection-molded handle is an authentic Milwaukee replacement part. It is used in a many power tools including sanders, nibblers, and polishers. This ergonomic side handle simply twists into/out of place with no tools required. For improved comfort, it can be moved to different locations on a tool easily and quickly. Sold individually.

This is a genuine OEM sourced replacement part which is specially designed for use with Milwaukee power tools. It is a standard hardware which has multiple uses based on the model of your tool, please make sure to check the appropriate diagrams for the correct location and application of this component. This screw is made of high-quality ...Read moremetal and is sold individually, you will need a flat-head or a Torx screwdriver to secure or remove it.

This Milwaukee Quik-Lok® cord is a genuine OEM replacement part, it is sold individually. This is a three wire grounded 8 foot cord for fast field replacement of a damaged cord. Made of premium grade Hi-Flex wire the cord is quickly removed and attached to Milwaukee tools with the Quik-Lok® cord feature. To change a damaged cord simply...Read more turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove. To re-attach a new cord, line up the pins in the end of the tool with the pin receptacles in the end of the cord, push together and turn the collar clockwise to lock in place. The Cord has a 5-15P NEMA type plug.

Genuine Milwaukee replacement part, this item is sold individually. The purpose of the Brush Retaining Screw or Brush Cap, is to secure the brushes and keep the brush tight against the armature in the housings of the tool models shown below.

It is an authentic manufacturer approved replacement item that is specially produced for Milwaukee drills. This metal bearing helps to secure intermediate pinion gear while allowing it to spin freely with minimal friction. Over time this part may wear out and restrict movement, if this happens it can easily be replaced. Please note this high quality item is sold individually.