098R Cub Cadet - Parts

The Lever and Knob Assembly (or Front Wheel Height Adjuster) is used to adjust the front height of the mower, and attaches on the front wheels. It can be installed using a socket set and wrench set, and is rated as "easy" to install by our customers. If broken or damaged (likely due to general wear over time) you will no longer be able to...Read more move it to make adjustments, and the part should be replaced. This black, plastic part is sold individually. Refer to your make, model and diagrams to ensure this part fits your machine.

This air cleaner cartridge is designed for small engines to effectively filter dust, dirt, and grass debris from the intake system. Featuring a flat, pleated paper design, it helps maintain proper airflow for smooth engine operation and dependable performance. It’s an easy, drop-in replacement for routine maintenance, supporting cleaner combustion and longer engine life.

This is the lower handle for various models of walk-behind lawn mowers. This handle is made of durable black metal and attaches directly to the rear of the lawn mower. This handle is an OEM part that is sold by itself and does not come with any hardware or other parts. If your current lower lawn mower handle is corroded or damaged, it nee...Read moreds to be replaced immediately so you can properly and safely handle your lawn mower. This handle measures approximately 24.5-inches long and 17-inches wide and connects the rear of the lawn mower with the upper and main handle that the user holds when operating the lawn mower. Replacing this handle will not require any tools but must start with turning off the lawn mower. Loosen and remove the knobs around the handle, including the ones connecting the lower handle to the mower and those securing the upper and lower handles. Once each knob is removed, replace the old lower handle with the new one, and resecure • all the knobs onto the handle(s).

This Washer-Lock 5/16 is a silver metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter it is used to prevent the nut from backing off and becoming loose on the pulley shaft and is attached to the drive belt pulley assembly. You will know if you need t...Read morehis because your owners manual will specify it or the model number of your machine will correspond with this part. If the part is broken due to fatigue the shafts will free spin when they should be locked together and must be replaced.

This Throttle Control Wire is a 55-inch black Throttle Cable, made of metal with a rubberized casing. It's rated as "Easy" to install, attaching from the throttle control to the carburetor, and requires both pliers and a screw driver. This cable controls the speed of the engine. If broken or damaged (due to typical wear from use) you will...Read more lose control of the engine speed, and the part must be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

This replacement spark plug is a high quality item that is commonly used on lawn and garden equipment. A spark plug is an important component that delivers electric current from the ignition system to the internal combustion engine. You should always gap the spark plug in accordance to the owners manual of the outdoor product you have. Pl...Read moreease note one spark plug is included per order that will require a socket wrench or a spark plug wrench to remove and secure it.

This is a genuine replacement part manufactured for use with outdoor power equipment. The screw includes a lock washer and is commonly used to secure the motor to the frame. This screw has various applications based on the model of the machine it is used with. The screw is sold as an individual replacement part, please see model diagram for part location and usage.

This is an original replacement part manufactured for use with walk-behind lawnmowers. The metal rope guide mounts to the side rail of the handle, and is secured by a handle knob. The rope guide keeps the starter rope on the upper handle for ease of access, and to keep the rope out of the way while operating. The rope guide is sold individually.

This Bell-Wash Flat Washer is an OEM part that measures .40 inches I.D. x 88 inches O.D. This washer is a silver, metal, washer sold individually. This part is rated as Easy to install by customers. If missing or damaged (likely due to fatigue) it should be replaced. Refer to your owners manual to ensure this is the correct part for you.

This item is priced as an individual replacement part. The wheel is made out of plastic. A wrench may be helpful when replacing this item. It may become broken and will need to be replaced. This is an OEM part directly sourced from the manufacturer for use in lawn mowers made by MTD, Yard Machines, Troy-Bilt, Bolens, and Yard Man.

This item is a genuine OEM sourced replacement part that is intended to be used with riding lawnmowers from Cub Cadet, Yard Machines, Troy-Bilt, Bolens, and Yard-Man. The clip is used to attach the trail-shield to the back of the mower\\\'s deck. The hinge clip is sold as an individual replacement part, please note two clips may be needed.