092506-0655-99 Briggs and Stratton Engine - Overview

This OEM grommet, also called a 90-degree breather tube, is sold individually. Black in color and made of rubber, this is a 90-degree elbow for the crankcase breather tube of your mower engine. If you notice a reduction in the mower engine performance, and engine backfires, this part is likely to be in need of replacing. It can develop cr...Read moreacks due to fatigue, and our troubleshooting tip is to inspect this part if dark smoke is coming out of the exhaust, it is a telltale sign. This is an easy repair to make, and does not require any tools. The new grommet attaches on the breather tube fromt he crankcase to the carburetor.

The O-Ring is a black rubber part, used to provide a seal between two pieces. It can be used in various locations on a variety of equipment. Installation is rate as "Easy" and will require a screw driver, pliers, socket set, and wrench set. If broken, damaged, or worn due to fatigue, you will have a leak and the part must be replaced. Refer to your make, model and diagrams to see if this is the right part for you.

It is an authentic manufacturer-sourced part which is made for use with Briggs and Stratton engines that are commonly installed on a variety of lawn and garden equipment. This is the special screw which helps to secure the air cleaner. This will provide an identical replacement for the original part that was installed on a new unit. This ...Read morehigh-quality screw is made of durable metal and is sold as an individual item. Make sure to refer to the appropriate diagrams for your model to ensure the proper replacement procedure. A screwdriver will be needed to perform this repair.

This authentic manufacturer-supplied washer is specially designed for use with Briggs and Stratton engines that are commonly installed on lawn and garden equipment. It is a special hardware that helps to provide a tight seal between connected components. This is an identical replacement for a missing or a damaged packing-needle valve that...Read more was installed on a new unit. One durable rubber part is included. Refer to the appropriate diagrams for your model to ensure the proper replacement procedure.

This needle valve kit is an OEM direct from Briggs & Stratton. The kit is compatible with many lawn and garden engines. This item is composed of high-quality metal and plastic components. Fastened to the engine carburetor, the kit carefully controls the fuel flow to the motor. A screwdriver and a wrench set is often required for the proper repair. The needle valve kit is sold individually.

The needle valve spring goes next to the idle mixture valve and is made of metal. This is available as an individual replacement part. This authentic item is supplied directly from the original equipment manufacturer for use with engines, generators, tillers, blower-vacuums, and lawn mowers made by Briggs & Stratton and Toro. During repla...Read morecement, it may require a screwdriver and a wrench set to help install this part correctly. It will require replacing if it becomes bent or broken.

This is an authentic replacement part manufactured for use with small engines. The metal cap is used to seal or cover the fill spout on the engine's fuel tank. This fuel tank cap is available as an individual replacement part, please see model diagram for associative parts.

This is an authentic OEM part from Briggs and Stratton and Toro for use with garden equipment engines. The stop wire connects the ignition coil to the stop switch to ground the spark voltage to the engine block when you release the bail control bar. This part is sold individually. The tool that you will need to replace the stop wire is pliers.

This is an authentic OEM sourced replacement part, it is specially produced for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. This is a standard hardware which has multiple applications based on the model of your unit, please refer to appropriate diagrams for the correct and use of this item. T...Read morehis Torx screw is made of high-quality metal and it is sold individually, it includes one washer.

It is a genuine replacement component which is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. This is the special spacer for the fuel tank, please check appropriate diagrams of your model for the correct location and application of this hardware. It is made of high-quality metal and it is sold individually.