Models > 09084-0

09084-0 Briggs and Stratton Generator - Overview

Sections of the 09084-0

[Viewing 1 of 1]
Diagram and Parts List for Briggs and Stratton Generator
Keep searches simple, eg. "belt" or "pump".
Plug-Spark – Part Number: 796112S
Plug-Spark
★★★★★
★★★★★
(1)
PartSelect #: PS9140427
Manufacturer #: 796112S
This part is the replacement spark plug for your engine. It measures approximately 2.5 inches by 1 inch. The spark plug creates the spark that ignites fuel in your engine during the combustion process...
$4.99
  In Stock
Filter – Part Number: 298090S
Filter
PartSelect #: PS9275043
Manufacturer #: 298090S
This is a round, inline fuel filter with 0.25-inch nipples, used in a variety of lawn and garden equipment. It is sourced from the original equipment manufacturer and has the capability to filter out ...
$4.99
  In Stock
Pulley-Starter – Part Number: 295871
Pulley-Starter
PartSelect #: PS8942071
Manufacturer #: 295871
$15.80
  In Stock
Key-Flywheel – Part Number: 222698S
Key-Flywheel
★★★★★
★★★★★
(1)
PartSelect #: PS8925657
Manufacturer #: 222698S
$4.99
  In Stock
Gasket-Cylinder Head – Part Number: 272157S
Gasket-Cylinder Head
PartSelect #: PS8941204
Manufacturer #: 272157S
The cylinder head gasket, also known just as the head gasket, is an OEM part sold individually. Grey in color, the head gasket provides a seal between the cylinder head and the engine block in your en...
$6.91
  On Order
Clutch-Starter – Part Number: 399671
Clutch-Starter
★★★★★
★★★★★
(2)
PartSelect #: PS8968281
Manufacturer #: 399671
$37.32
  In Stock
Seal-Oil – Part Number: 299819S
Seal-Oil
PartSelect #: PS8948679
Manufacturer #: 299819S
This OEM Oil Seal is an individually sold rubber part which is attached around the axis shaft on the crankcase housing to provide a proper seal. A broken seal will lead to a leak, and the part should ...
$5.99
  In Stock
Magneto – Part Number: 397358
Magneto
PartSelect #: PS9278124
Manufacturer #: 397358
$58.83
  In Stock
Gasket-Intake – Part Number: 27355S
Gasket-Intake
PartSelect #: PS8941014
Manufacturer #: 27355S
$4.99
  In Stock
Gasket-Breather – Part Number: 27549S
Gasket-Breather
PartSelect #: PS8943888
Manufacturer #: 27549S
The Breather Gasket is OEM and used to provide an airtight seal for the breather assembly. It is a gray part, attached between the breather cap and engine. Installation is rated "Easy" and will requir...
$4.99
  In Stock
Gasket- Exhaust – Part Number: 692237
Gasket- Exhaust
★★★★★
★★★★★
(1)
PartSelect #: PS9294810
Manufacturer #: 692237
$5.71
  In Stock
Gasket-Crkcse (.015 Thick)(Stand) – Part Number: 692213
Gasket-Crkcse (.015 Thick)(Stand)
PartSelect #: PS9063744
Manufacturer #: 692213
The Crankcase Gasket (.015) is a manufacturer-certified part which is rated as being "Medium" difficulty to install. It will require a screwdriver, socket set, wrench set, and nut driver. It s used to...
$3.99
  On Order
View More
Back to Top

Questions And Answers for 09084-0

Be the first to ask our experts a question about this model!

Back to Top

Common Symptoms of the 09084-0

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
5 HP Briggs and Stratton chipper shredder - no spark
Removed old sparkless magneto, replaced with new part PS9278124 Magneto, and still no spark. The only conclusion that I can draw, is this magneto is defective,
Parts Used:
Magneto
  • Thomas from ALFRED, ME
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
10 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Generator would not start, Birggs & Stratton recommended to replase Gasket Exhaust.
Remove the spark suppresser, 4 face screws, 2 bottom screws and the two screws the hold the gasket. I also had to back out the top screw of the cover it blocked and prevented the removal of the gasket.
Parts Used:
Gasket- Exhaust
  • Alberto from PALMETTO BAY, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
7 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top