08766 Toro - Overview

This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place, on the impeller assembly. These nuts are a one-time use part due to their locking mechanism. You'll know the nut...Read more has broken when it appears to have damaged threads or rounded off edges. Customers found this to be an easy repair.

This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.

The Nut-Flange, Ni, simply known as a Flange Nut, is a silver metal individually sold part which can be applied with a wrench or socket and torque wrench. Simply torque the part to the manufacturer specifications. It is used to secure the idler arm assembly to the frame, and will need to be replaced if damaged. You can tell if it is brok...Read moreen if there are signs of visible damage, or the part won't tighten all the way due to damaged threads. Customers rated this repair as easy.

This is an original Toro replacement part. The screw is designed by the manufacturer for use in lawn tractors and riding mowers. This part is made of metal, and is generally used in securing the hydro drive. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the corre...Read morect part. You will require a wrench when replacing this item. This part is sold individually.

This replacement hardware is sourced from original equipment manufacturer for use with Toro snowthrowers. It is standard hardware which has multiple applications, please refer to appropriate diagrams for correct location and use of this locknut. This part is made from durable metal and it is sold individually.

The thrust washer is made of metal and goes next to the spring washer. This is a genuine replacement part sourced from the original manufacturer for use with lawn tractors made by Toro and Lawn Boy. This item is available as an individual replacement. During the installation process, a screwdriver might be needed to replace this part. It will need to be replaced if it breaks.

This is an authentic Toro replacement part, sourced from the original manufacturer for use with snowthrowers and lawn tractors. The hex nut is used with several different types of machines and the application of the nut can vary based on the model of equipment. This item is available as an individual replacement part, please see model diagram for the nut\'s location and usage.

This is an authentic OEM sourced replacement screw which is specially produced for use with Toro snowthrowers. It is one of the screws used to secure the auger, please refer to appropriate diagrams for the correct location and application of this hardware. This hex head screw is made of high-quality metal and it is sold individually.

This individual rubber O-ring is a genuine OEM part for various outdoor equipment models and has an approximately 1-inch inner-diameter. O-rings are typically used to seal various gaps within hydraulic systems to prevent the escape of liquids or gases, and if you notice that the motor of your equipment is leaking or performing poorly, it ...Read moremay be a sign of an aging O-ring, because over time they lose their elasticity and crack. Be sure to check any diagram of your equipment for the exact placement of this O-ring.