08201417 Ariens Engine - Overview

This fuel tank valve turns the fuel flow on or off between the tank and the engine. Closing the valve can stop fuel from moving through the line when the machine is stored or serviced. Replace the valve if it is leaking, stuck, cracked, or damaged. The inlet, outlet, line size, mounting style, and control direction must match. Check the e...Read morequipment manual and compare the original valve before ordering. Work away from heat, flames, and sparks.

This muffler heat shield is designed to protect surrounding components and the operator from high exhaust temperatures during equipment operation. By shielding heat and debris around the muffler area, it helps support safer operation, reduce wear on nearby parts, and maintain reliable performance. Ideal for replacing a damaged or missing ...Read moreshield, it restores proper heat protection and safe operation during regular use.

This carburetor meters fuel and air for the engine on select snow-removal and walk-behind equipment. Sealing gaskets are included to support installation and help prevent air or fuel leaks at the mounting surfaces. A carburetor problem may cause hard starting, surging, stalling, flooding, or poor response, but fuel supply, ignition, choke...Read more operation, and old fuel should also be checked. Confirm the equipment model, serial number, engine model, linkage arrangement, fuel connection, and mounting pattern before ordering this assembly.

This carburetor repair kit provides parts used to service a matching carburetor. It may replace worn seals, gaskets, valves, or other small parts that affect fuel and air flow. Review the kit contents before ordering because the exact pieces must match the carburetor being repaired. Check the equipment manual, carburetor shape, openings, ...Read moreand identification details. Clean the work area and follow the listed fuel safety and adjustment steps during the repair. Before buying, review the machine's parts list and make sure each listed size and feature matches the part you are replacing. This is a genuine OEM part sourced from the manufacturer directly.

This 120-volt electric start conversion kit adds an electric starting option to matching equipment. It lets the engine use a 120-volt power sourced during starting when installed as directed. The engine, mounting points, wiring, plug, and starter setup must support this conversion. Check the equipment manual, approved fit list, and kit co...Read morentents before ordering. Follow all electrical and installation instructions, and keep the power cord away from fuel, heat, sharp edges, and moving parts. Before buying, review the machine's parts list and make sure each listed size and feature matches the part you are replacing.

This fuel on/off control knob is used to open or shut off fuel flow to the engine. It allows the operator to easily manage fuel during starting, operation, or storage. Replacing a worn or broken knob restores smooth fuel control and helps prevent leaks or fuel delivery issues.

This round black recoil starter assembly turns the engine when the starter rope is pulled. The internal spring rewinds the rope after each pull. Replace the assembly if the housing, rope, handle, pulley, spring, or starter dogs are worn or damaged. The round shape, mounting holes, engagement parts, rotation, and engine fit must match. Che...Read moreck the equipment manual and compare the original starter from every side before ordering or installing this replacement. Before buying, review the machine's parts list and make sure each listed size and feature matches the part you are replacing.