080232-4021-01 Briggs and Stratton Engine - Overview

This is a replacement air filter/AC cartridge for your small engine. The air filter prevents dirt and debris from entering the engine. Over time, the air filter can become clogged or damaged, and this can lead to reduced performance. This air filter is approximately 4 inches wide and approximately 5 inches long. To replace the air filter,...Read more locate the air filter cover on the side of the engine, unscrew it, and remove the old filter. Be sure to clear out any dirt, clippings, or other debris that has found its way into the air filter assembly before you insert the new filter. Reattach the air filter cover, and secure it with the screws. This product is sold individually.

This is a carburetor diaphragm, which is an OEM part that pumps fuel from the tank to the engine. It is roughly 1x2 inches and black in color. Sold individually, this part can fail due to fatigue and wear, and if it is broken you may notice your engine is running rough or not starting. If your engine exhibits these signs of being starved...Read more of fuel, your diaphragm is damaged and needs to be replaced. Our customers found this repair to be of medium difficulty. It requires a wrench, screwdriver, and pliers to complete. You will be able to locate your diaphragm inside the carburetor itself to swap it out with your new one.

Genuine Manufacturer Approved replacement part, fits 3-5 gross HP Horizontal crankshaft engines (Pulsa-Jet Carburetors). This part is sold individually. Diaphragms are an essential part of an engine because they provide an air tight seal where it is needed to ensure proper operation of an engine at it maximum potential.

This is the intake gasket designed for various models of small engine equipment, including blower vacuums. The intake gasket plays a crucial role in internal combustion engines, creating an airtight seal between the cylinder head and the intake manifold. This seal prevents the leakage of air, coolant, or fuel. Our intake gasket is an offi...Read morecial OEM (Original Equipment Manufacturer) part, crafted from high-quality composite material. If you notice issues such as engine misfiring, overheating, coolant or oil leaks, or overall poor performance, it is essential to inspect and replace your intake gasket promptly. Regular maintenance of your engine and equipment can help prevent damage to other components and reduce the frequency of repairs. To replace this gasket, begin by disconnecting the spark plug and opening the air intake cover to access the air filter. Use a wrench to remove the air filter housing, exposing the internal components. Replace the old intake gasket, reassemble the housing, and put your engine back together. Turn on your equipment and monitor its performance to ensure it runs smoothly.

This rewind starter spring or as it is also known, recoil spring, rewinds the pull robe back into the starter housing of your engine. The spring is made of metal, silver colored, and sold individually. Over time, you may notice that you are having trouble retracting your pull cord, which could be a symptom of the rewind starter spring f...Read moreailing due to fatigue or wear. Replacing this part is a repair our customers found easy. Locate and replace the start spring inside the starter housing; no special tools are required for this job.

This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Pliers to replace this item.

Genuine Manufacturer Approved replacement part used on a variety of Engines. This is a tube pick-up for 3-5HP horizontal and 5HP vertical engines with 2 and 3 quart tanks and a pulsa jet carburetor. This part is made out of Plastic and it is Sold Individually.

Hard starting may come from the recoil system instead of the carburetor or spark plug. If the rope pulls but the engine does not turn, the starter clutch may be worn, dirty, or jammed. The clutch turns the crankshaft during starting and lets go when the engine runs. First inspect the rope, rewind spring, pulley, flywheel screen, and clutc...Read moreh bearing. Confirm fit with the complete engine number. Remove the spark plug wire, wait for hot parts to cool, and keep dirt out of the bearing area. Test free movement before putting the shroud back on.

This is a genuine replacement pre-cleaner filter used with Briggs and Stratton engines. It is supplied directly from original equipment manufacturer. Its purpose is to filter out dust and debris from contaminating the engine. This filter is made out of paper and metal. This item is sold individually. Replacing this filter is a simple that that would only require a wrench.

This OEM engine screw is a genuine Briggs & Stratton replacement fastener designed for secure, vibration-resistant attachment of engine components in small gasoline engines and outdoor power equipment. Manufactured to exact factory specifications, it provides proper thread engagement and clamping force to help prevent loosening, reduce vi...Read morebration, and maintain long-term engine reliability under operating stress. Built with durable, corrosion-resistant materials for extended service life, it is an ideal replacement when original screws are missing, stripped, or worn, helping ensure safe assembly, consistent performance, and proper engine operation.

It is a genuine item that is supplied by the original equipment manufacturer for sue with Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of this gasket is to provide a tight seal for the air cleaner assembly, unfortunately, over time the material will wear out and may begin to crack eventually req...Read moreuiring a replacement to maintain peak performance. Keep in mind this high-quality component is made of durable composite material and is sold individually. Please make sure to check the appropriate diagrams of your model for the correct location and application of this part.

This replacement armature-magneto is specially designed for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. It is an authentic part sourced directly from original equipment manufacturer. The armature-magneto also known as an ignition module produces pulses of high voltage for the spark plugs. Thi...Read mores item includes (1) armature-magneto and (1) lead wire per order. To complete this repair you will need screwdriver set.