Models > 080202-1611-01

080202-1611-01 Briggs and Stratton Engine - Overview

Sections of the 080202-1611-01

[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Plug-Spark – Part Number: 796112S
Plug-Spark
★★★★★
★★★★★
(1)
PartSelect #: PS9140427
Manufacturer #: 796112S
This part is the replacement spark plug for your engine. It measures approximately 2.5 inches by 1 inch. The spark plug creates the spark that ignites fuel in your engine during the combustion process...
$4.42
  In Stock
Order within the next 12 hrs and your part ships today!
Grommet – Part Number: 692189
Grommet
★★★★★
★★★★★
(1)
PartSelect #: PS9294797
Manufacturer #: 692189
This OEM grommet, also called a 90-degree breather tube, is sold individually. Black in color and made of rubber, this is a 90-degree elbow for the crankcase breather tube of your mower engine. If you...
$5.14
  In Stock
Order within the next 12 hrs and your part ships today!
Carburetor Rebuild Kit – Part Number: 495606
Carburetor Rebuild Kit
★★★★★
★★★★★
(1)
PartSelect #: PS8983479
Manufacturer #: 495606
This is the replacement carburetor kit for your small engine, used for outdoor power equipment. The carburetor rebuild kit includes the float, needle, gaskets, and seals that you need to refurbish you...
$34.11
  In Stock
Order within the next 12 hrs and your part ships today!
Grommet – Part Number: 692187
Grommet
★★★★★
★★★★★
(2)
PartSelect #: PS9064851
Manufacturer #: 692187
This grommet is an OEM part that is a 45-degree elbow for the crankcase breather tube of your mower engine. That is why it is also known as a 45-degree breather tube. The part is made of rubber and ...
$4.90
  In Stock
Order within the next 12 hrs and your part ships today!
Diaphragm-Carburetor – Part Number: 270026
Diaphragm-Carburetor
★★★★★
★★★★★
(2)
PartSelect #: PS8937201
Manufacturer #: 270026
This is a carburetor diaphragm, which is an OEM part that pumps fuel from the tank to the engine. It is roughly 1x2 inches and black in color. Sold individually, this part can fail due to fatigue and ...
$3.82
  In Stock
Order within the next 12 hrs and your part ships today!
Tube-Pick Up – Part Number: 391813
Tube-Pick Up
PartSelect #: PS8966338
Manufacturer #: 391813
  No Longer Available
Spring-Rewind Str – Part Number: 490179
Spring-Rewind Str
PartSelect #: PS8978476
Manufacturer #: 490179
This rewind starter spring or as it is also known, recoil spring, rewinds the pull robe back into the starter housing of your engine. The spring is made of metal, silver colored, and sold individually...
$14.83
  In Stock
Order within the next 12 hrs and your part ships today!
Gasket-Fuel Tank – Part Number: 272409S
Gasket-Fuel Tank
PartSelect #: PS8943841
Manufacturer #: 272409S
This fuel tank gasket is an OEM part certified by the manufacturer, and it provides a seal on the gas tank and carburetor of your machine. This fuel tank gasket is gray in color and made of composit...
$4.90
  In Stock
Order within the next 12 hrs and your part ships today!
Key-Flywheel – Part Number: 222698S
Key-Flywheel
★★★★★
★★★★★
(1)
PartSelect #: PS8925657
Manufacturer #: 222698S
$3.10
  In Stock
Order within the next 12 hrs and your part ships today!
Clutch-Starter – Part Number: 399671
Clutch-Starter
★★★★★
★★★★★
(2)
PartSelect #: PS8968281
Manufacturer #: 399671
$35.30
  In Stock
Order within the next 12 hrs and your part ships today!
Seal-Oil – Part Number: 299819S
Seal-Oil
PartSelect #: PS8948679
Manufacturer #: 299819S
This OEM Oil Seal is an individually sold rubber part which is attached around the axis shaft on the crankcase housing to provide a proper seal. A broken seal will lead to a leak, and the part should ...
$5.38
  In Stock
Order within the next 12 hrs and your part ships today!
Gasket-Intake – Part Number: 27355S
Gasket-Intake
PartSelect #: PS8941014
Manufacturer #: 27355S
$3.82
  In Stock
Order within the next 12 hrs and your part ships today!

Questions And Answers for 080202-1611-01

Be the first to ask our experts a question about this model!

Common Symptoms of the 080202-1611-01

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Could not keep an aftermarket muffler on the engine.
Once I determined what OEM muffler I needed, installation was relatively easy. I have a 1982 4hp Briggs on my Snapper tiller. There was a 90* galvanized elbow coming out of the exhaust port, with a bezel nut to lock it down. Do not remove the elbow, even though it appears that you should. If you install the muffler without the elbow the muffler will parallel the the vacuum for the carburetor and can melt the rubber couplers. Use the elbow to direct the heat away from the carburetor. Use a pipe wrench to lock down the bezel nut because the weight of the muffler, especially under vibration, can work loose and fall down on the tine belt cover and melt it. The bezel nut that comes with the muffler should also be used to lock down the muffler to the threaded intake bracket that comes with the muffler, not to replace the bezel nut for the elbow.
Parts Used:
Muffler
  • Richard from KERNERSVILLE, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace fuel diaphragm, fuel pickup tube and air cleaner
This 5hp B&G was manufactured in 1985! Had been garage kept and always dependable. After 10 years of non use the carb wasn't getting gas. Removed air cleaner box, muffler and crankcase breather to easily remove carb, replace parts and reassemble.
Parts Used:
Spring-Pump Diaphragm Tube-Pick Up Gasket-Fuel Tank Element-Air Cleaner Gasket-Intake Diaphragm-Carburetor
  • Gerald from MAULDIN, SC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!