066 - Overview

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws...Read more used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Generac portable generators. The bolt helps to secure the cover. This is a high-quality replacement for a missing or a damaged hardware that was originally installed on a new unit. Please make sure to check the appropriate diagrams of your...Read more model for the correct location and application of this part. Keep in mind this high-quality cover bolt is made of durable metal and is sold individually. A wrench will be needed to secure or remove it.

The exhaust system helps a portable air conditioner remove heat from the room. Poor cooling can occur when the inner air passage is damaged or blocked. Clean the filter and inspect the hose, outlet, and fan before buying a new part. Confirm fit with the full model number because mounting holes and shapes may differ. Disconnect power and l...Read moreet the unit cool before service. Install every seal correctly, secure the covers, and check for strong airflow during a short test.

Proper setup helps a portable air conditioner cool the room. Replace the installation kit if its window panel, hose connection, or sealing parts are cracked, missing, or no longer secure. First check that the exhaust path is clear and that hot air is not leaking back indoors. Confirm fit with the complete model number because kit sizes an...Read mored connectors can differ. Disconnect power before working, follow the owners manual, and do not stretch or sharply bend the exhaust hose.

Genuine Presto replacement part, this item is sold individually. For use with Presto Heat control, with small probe, used on all current electrical appliances. It has a 29 inch cord. The heat range is from 0-400 degrees. It is compatible with the appliances shown below.

This piezo ignitor button is an OEM part direct from Char-Broil. Compatible with many grills, this metal and plastic component is sold individually. The piezo ignitor button creates the needed spark to light the grill burner. You may need a screwdriver and pliers for the repair.

This is an original replacement part sourced directly from the manufacturer. The rocker arm is found in Generac generators. This part is made of metal, and is attached to the push rod guide plate in the head guide and seat assembly. You may require a screwdriver or Allen wrench when replacing this product. This item is sold as an individual replacement part.

This OEM spring bell washer is a small, circular piece of metal that is shaped like a cone and has an inside diameter of 1/4 of an inch. It is also called a Belleville washer or a disc spring, and it is used in lawn equipment to help spread out pressure and absorb shock between parts. If a washer is broken, it may look flattened or distor...Read moreted, and your machine may make unusual vibrations or noises. If you do not replace a damaged spring bell washer, your machine will wear out faster because there will be nothing to cushion its parts. To remove a washer, you can use pliers or a flathead screwdriver to pry it from your machine. If it is difficult to remove, you can use a penetrating oil to loosen it first. To make sure you purchase the correct number of washers, which are sold separately, check your user guide to see where they are needed in your machine.

Genuine Manufacturer Sourced replacement kit used on Presto Electric Griddle/Skillet. This kit includes Two (2) Plastic Legs/Handles. Please note Body Handle Screws are used to attach these parts are Sold Separately.

Smooth drainage helps prevent water from backing up inside a dehumidifier. Replace the drain hose if it is split, leaking, badly bent, or too stiff to seal correctly. First clean the drain port and make sure the outlet is not blocked. Confirm the correct hose using the complete model number. Disconnect power and remove stored water before...Read more starting. For gravity drainage, keep the hose sloping downward without loops. Run a short test and watch for drips or slow flow.

This is a genuine replacement part sourced directly from the manufacturer. The push nut is commonly found in yard equipment from MTD and Yard Machines, such as lawn tractors, snow throwers, and tillers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please refer to the parts diagra...Read morem to be sure of ordering the correct part. Be aware that most push nuts are not reusable and will need to be replaced every time they are removed. You may wish to purchase spares of this part.