Models > 060102-1111-01

060102-1111-01 Briggs and Stratton Engine - Overview

Sections of the 060102-1111-01

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Plug-Spark – Part Number: 796112S
Plug-Spark
★★★★★
★★★★★
(1)
PartSelect #: PS9140427
Manufacturer #: 796112S
This part is the replacement spark plug for your engine. It measures approximately 2.5 inches by 1 inch. The spark plug creates the spark that ignites fuel in your engine during the combustion process...
$4.42
  In Stock
Order within the next 11 hrs and your part ships today!
Spring-Rewind Str – Part Number: 490179
Spring-Rewind Str
PartSelect #: PS8978476
Manufacturer #: 490179
This rewind starter spring or as it is also known, recoil spring, rewinds the pull robe back into the starter housing of your engine. The spring is made of metal, silver colored, and sold individually...
$14.83
  In Stock
Order within the next 11 hrs and your part ships today!
Key-Flywheel – Part Number: 222698S
Key-Flywheel
★★★★★
★★★★★
(1)
PartSelect #: PS8925657
Manufacturer #: 222698S
$3.10
  In Stock
Order within the next 11 hrs and your part ships today!
Clutch-Starter – Part Number: 399671
Clutch-Starter
★★★★★
★★★★★
(2)
PartSelect #: PS8968281
Manufacturer #: 399671
$35.30
  In Stock
Order within the next 11 hrs and your part ships today!
Seal-Oil – Part Number: 299819S
Seal-Oil
PartSelect #: PS8948679
Manufacturer #: 299819S
This OEM Oil Seal is an individually sold rubber part which is attached around the axis shaft on the crankcase housing to provide a proper seal. A broken seal will lead to a leak, and the part should ...
$5.38
  In Stock
Order within the next 11 hrs and your part ships today!
Gasket-Intake – Part Number: 27355S
Gasket-Intake
PartSelect #: PS8941014
Manufacturer #: 27355S
$3.82
  In Stock
Order within the next 11 hrs and your part ships today!
Screw – Part Number: 692198
Screw
PartSelect #: PS9294799
Manufacturer #: 692198
$5.85
  In Stock
Order within the next 11 hrs and your part ships today!
Switch-Rotary – Part Number: 692309
Switch-Rotary
★★★★★
★★★★★
(1)
PartSelect #: PS9074729
Manufacturer #: 692309
$23.57
  In Stock
Order within the next 11 hrs and your part ships today!
Gasket-Breather – Part Number: 27549S
Gasket-Breather
PartSelect #: PS8943888
Manufacturer #: 27549S
The Breather Gasket is OEM and used to provide an airtight seal for the breather assembly. It is a gray part, attached between the breather cap and engine. Installation is rated "Easy" and will requir...
$3.82
  In Stock
Order within the next 11 hrs and your part ships today!
Filter-Air Cleaner Cartridge – Part Number: 396424S
Filter-Air Cleaner Cartridge
PartSelect #: PS8967621
Manufacturer #: 396424S
$17.23
  In Stock
Order within the next 11 hrs and your part ships today!
Boot-Spark Plug – Part Number: 66538S
Boot-Spark Plug
PartSelect #: PS9055852
Manufacturer #: 66538S
$3.46
  In Stock
Order within the next 11 hrs and your part ships today!
Screw – Part Number: 690953
Screw
PartSelect #: PS9073131
Manufacturer #: 690953
$5.61
  In Stock
Order within the next 11 hrs and your part ships today!

Questions And Answers for 060102-1111-01

Be the first to ask our experts a question about this model!

Common Symptoms of the 060102-1111-01

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Could not keep an aftermarket muffler on the engine.
Once I determined what OEM muffler I needed, installation was relatively easy. I have a 1982 4hp Briggs on my Snapper tiller. There was a 90* galvanized elbow coming out of the exhaust port, with a bezel nut to lock it down. Do not remove the elbow, even though it appears that you should. If you install the muffler without the elbow the muffler will parallel the the vacuum for the carburetor and can melt the rubber couplers. Use the elbow to direct the heat away from the carburetor. Use a pipe wrench to lock down the bezel nut because the weight of the muffler, especially under vibration, can work loose and fall down on the tine belt cover and melt it. The bezel nut that comes with the muffler should also be used to lock down the muffler to the threaded intake bracket that comes with the muffler, not to replace the bezel nut for the elbow.
Parts Used:
Muffler
  • Richard from KERNERSVILLE, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!