0519 - Overview

This four-bolt hub kit connects a matching wheel or rotating part to its shaft or axle. Replace the hub if the original body, studs, bolt holes, keyway, or bearing area is cracked, loose, worn, or damaged. The four-bolt pattern alone does not confirm fit. The center opening, bolt spacing, offset, shaft connection, and outside size must al...Read moreso match. Check the equipment manual and review the kit contents before ordering or installation. Before buying, review the machine's parts list and make sure each listed size and feature matches the part you are replacing. This is a genuine OEM part sourced from the manufacturer directly.

Clean hydrostatic fluid is maintained by this transmission oil filter, which captures wear material and contamination before the fluid returns through the drive system. It is used on select serviceable hydrostatic transaxles and replaces an earlier filter in compatible applications. Filter quantity and service intervals vary by machine. C...Read moreonfirm the equipment model, serial number, transaxle identification, thread and seal arrangement, required filter quantity, and specified hydraulic fluid before ordering. Follow the equipment manual for draining, refilling, filter tightening, and system purging.