04215 (60001-69999) Toro Lawn Mower - Overview

This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place, on the impeller assembly. These nuts are a one-time use part due to their locking mechanism. You'll know the nut...Read more has broken when it appears to have damaged threads or rounded off edges. Customers found this to be an easy repair.

The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has...Read more broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

This is a genuine Toro replacement part that has been sourced from the original manufacturer to be used with lawnmowers and lawn tractors. The metal hex nut is used with different models of lawnmowers. The application of the nut can vary based on the model of the machine. It is recommended to review your model's part diagram to confirm th...Read moree nut's compatibility and usage. This item is sold as an individual replacement part.

The Lock Nut is used to secure and lock parts in place. This is a gold, metal, individually sold part which can be installed with a wrench set, and socket set, and attaches onto various locations on a variety of equipment. If broken, damaged or worn, the part may be loose, and there may also be physical damage to the nut, at which time it...Read more should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

This flat metal washer fits onto the speed guide-selector and is available individually. Please note that more than one washer may be needed when replacing parts. It will need to be replaced if it becomes lost or broken and may require a wrench during installation. This is an OEM Toro part sourced directly from the manufacturer and used in snowthrowers.

This replacement screw is a high quality item that is supplied from original equipment manufacturer for use on Toro lawn and garden equipment. It has multiple applications depending on your equipment, please make sure to check appropriate diagrams for correct location and use of this item. One durable metal hex head screw is included per order.

This is a genuine Toro replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The metal flat washer is used to disperse pressure put on a part assembly by a nut or bolt across a wider surface area. This item is used with several different models of snowthrowers. It is recommended to review your...Read more model\\\'s part diagram to confirm the washer\\\'s compatibility and usage. The flat washer is priced individually.

This item has been sourced from the original manufacturer and is intended to be used with snowthrowers from Toro. The metal woodruff key is used to link the motor drive shaft and the impeller pulley to allow the shaft to rotate the pulley. This woodruff key is priced as a single item.

This item has been sourced from the original manufacturer to ensure quality. The metal screw is intended to be used with snowthrowers from Toro and Lawn-Boy. This screw is used to secure the bearing flange to the side of the auger housing. The screw is priced as a single item.

This lock nut is used to secure threaded fasteners, to prevent them from loosening and falling off during use. It is sourced from the original manufacturer for use in various lawn and outdoor equipment. The nut has a nylon insert on one end which holds the fastener and locks the nut in position. It comes in a hexagonal shape, which makes ...Read moreit easier to grip, and ensures better stability. It is normal for a lock nut to corrode, crack or wear down over time. You will likely notice increased vibration, noise, and instability from your equipment when the nut is no longer able to securely hold the fastener. To remove and replace a lock nut, nut use a wrench or socket. Regularly inspecting and replacing the lock nuts in your equipment is important in maintaining the longevity of the equipment. Each nut is sold individually.

This is an authentic Toro replacement part. The flat washer is commonly found in a variety of Toro yard machines such as lawn mowers and snow throwers. The flat washer is generally used to provide space and protection between a nut or bolt head and a housing. Please be aware that there are different washers used in the machine. Refer ...Read moreto the parts diagram to be sure of ordering the correct part. You may require a wrench, screwdriver, or pliers to replace this item. This part is sold individually.