030732-00 Briggs and Stratton Generator - Overview

This is a replacement air filter/AC cartridge for your small engine. The air filter prevents dirt and debris from entering the engine. Over time, the air filter can become clogged or damaged, and this can lead to reduced performance. This air filter is approximately 4 inches wide and approximately 5 inches long. To replace the air filter,...Read more locate the air filter cover on the side of the engine, unscrew it, and remove the old filter. Be sure to clear out any dirt, clippings, or other debris that has found its way into the air filter assembly before you insert the new filter. Reattach the air filter cover, and secure it with the screws. This product is sold individually.

This fuel line is compatible with several different makes and models of small engine equipment and is sold as an individual part. Equipped with the securing clamp, this rubber fuel line is used to transfer fuel from the fuel tank to the carburetor, and over time and due to exposure of gas, this fuel line can become brittle and crack, requ...Read moreiring a replacement. If you find your equipment is performing worse, check the fuel line for any visible signs of damage. To replace the fuel line, you will need to disconnect the spark plug and drain the fuel from your equipment, before simply removing the old line and installing the new one and reassembling the rest of the motor.

This is a genuine manufacturer-sourced part which is specially designed for Briggs and Stratton portable generators. The support-leg helps to provide support for the unit. If the original item is worn, damaged or is missing, this will provide an identical replacement. Refer to the appropriate diagrams for your model to ensure the correct ...Read morerepair procedure. Keep in mind this high-quality support-leg is made of durable material and is sold individually. A wrench set will be needed to replace this part.

This flywheel puller is designed for servicing larger small engines by safely removing tightly seated flywheels without stressing the crankshaft or damaging ignition components. Constructed from heavy-duty steel and engineered to apply even pulling force, it makes accessing the magneto, crankshaft key, or ignition system straightforward d...Read moreuring repairs or overhauls. Built to OEM specifications for durability and precise fit, it’s a reliable tool for maintaining lawn mowers, generators, and pressure washers with compatible engines.

This is an authentic Briggs & Stratton replacement part that is intended to be used with portable generators. The valve is used to connect the fuel line to the tank and to control the flow of fuel from the tank. This item is available as an individual replacement part.

The OEM E-Ring is a silver metal part used to secure the wheel on the shaft. If broken, the wheel may fall off, and the part must be replaced. It is rated as "Easy" to install and requires pliers and a screw driver.

This high quality replacement starter rope is an authentic item that is supplied directly from original equipment manufacturer for use with Briggs and Stratton engines that are commonly installed on Toro lawn and garden equipment. It is an important part of the starter system that allows user to pull-start the engine. Please note this durable nylon item is sold individually.

It is an authentic OEM sourced part which is specially made for use with Briggs and Stratton engines commonly installed on a variety of lawn and garden equipment. This is an identical replacement for a faulty or a missing spark plug wrench that was included with a new unit. The wrench allows a user to secure or remove a spark plug. Refer ...Read moreto the appropriate diagrams for your model to ensure the exact location and the correct application of this component. A screwdriver will be needed to secure or remove this part. This high-quality part is made of durable metal and is sold as an individual item. Note. This spark plug wrench fits 5/8" and 13/16" spark plugs.

This is a genuine OEM replacement part used with many lawn and garden engines. The Briggs & Stratton casing clamp is often used to secure the governor control plate to the tank assembly. This item is sold individually. A wrench is needed for making the replacement.

An authentic replacement part that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is the special component which is attached to the starter rope to provide a user with a comfortable grip to pull-start the engine. This durable part is made of high-quality plastic and it is sold individually.

This is a genuine replacement carbon brush which is supplied by the original equipment manufacturer for use with Briggs and Stratton portable generators. The purpose of the brush is to help conduct the current by maintaining physical contact with an armature inside the electric motor which powers the unit. It is a high-quality component w...Read morehich consists of a durable plastic holder and two carbon brushes with attached lead wires and springs.

The spark plug is made out of metal and helps to ignite the fuel. This is an authentic part from Briggs & Stratton for use in engines. Keep in mind this high-quality item is sold individually. When replacing this part a wrench and a set of pliers may be needed. It will need to be replaced if it stops working.