0234-6 (532D) Milwaukee Electric Drill - Overview

Genuine Milwaukee replacement part, this item is sold individually. This Chuck Key tightens the jaws of the 1/2 inch capacity Chucks on all the Drill models shown below. For convenience a Chuck Key Holder part number 48-66-4040 can be ordered. It is attached to the power cord then the Chuck Key is attached to it.

This is a genuine Milwaukee replacement part, it is sold individually. The purpose of the 06-75-3150 Screw is to secure the chuck to the spindle of the models listed below. This is a left hand threaded screw, to remove it turn it clockwise. We do have an article and video on

This authentic replacement part is designed for use with Milwaukee drills/drivers. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Bearings experience constant wear from pressure, heat,...Read more vibration and friction. Because of this, many bearings need to be periodically replaced. This part is made out of metal and it is sold individually.

This is an authentic OEM component from the Milwaukee manufacturer. The brush holder assembly is compatible with the 0234-6 (532D) 1/2" Magnum Hole-Shooter. The plastic, metal and carbon brush component is fitted onto the motor housing and field, assisting with the electrical current conduction. This part is sold individually. A screwdriver is needed to make the proper removal and replacement.

This Milwaukee Quik-Lok® cord is a genuine OEM replacement part, it is sold individually. This is a three wire grounded 8 foot cord for fast field replacement of a damaged cord. Made of premium grade Hi-Flex wire the cord is quickly removed and attached to Milwaukee tools with the Quik-Lok® cord feature. To change a damaged cord simply...Read more turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove. To re-attach a new cord, line up the pins in the end of the tool with the pin receptacles in the end of the cord, push together and turn the collar clockwise to lock in place. The Cord has a 5-15P NEMA type plug.

It is an authentic manufacturer approved replacement item that is specially produced for Milwaukee drills. This metal bearing helps to secure intermediate pinion gear while allowing it to spin freely with minimal friction. Over time this part may wear out and restrict movement, if this happens it can easily be replaced. Please note this high quality item is sold individually.

This is a genuine Milwaukee part, it is sold individually. The chuck is the top portion of the drill that holds the different drill bits. It is compatible with a variety of drills listed below. If your drill's bit retention is suffering, the rotation feels stiff, or the chuck has seized up entirely, a new chuck should fix the problem. Thi...Read mores chuck is made of metal. To install this chuck, thread the new chuck assembly onto the spindle. Secure the chuck assembly as tightly as possible( by hand). Open the chuck to accept the retaining screw. Install the retaining screw and secure the screw with a Phillips screwdriver. The screw is reverse-threaded ( requiring counterclockwise rotation to secure.

This is a genuine manufacturer-sourced component which is specially designed for use with Milwaukee equipment. It is an identical replacement for a missing or a faulty hardware that is utilized to secure the brush holder, please make sure to check the appropriate diagrams of your model for the correct location and application of this part...Read more. Keep in mind this high-quality screw is made of durable metal and is sold individually.