020232-2-580752012 Craftsman Pressure Washer - Overview

Sourced directly from the manufacturer, this part is used to open and release hot water if the water exceeds the maximum operating temperature. It has metal and plastic components, is not part of a kit or assembly, and is sold individually. When malfunctioning, the Thermo Relief Valve will open on a regular basis, which can cause damage ...Read moreto your pump. If it is opening often or on a regular basis, replace it to protect your pump from damage. You will need a socket set, a wrench set, and pliers to complete this repair. Customers rate this repair as Easy.

Designed for use in various models of pressure washers, air compressors, and generators, this Woodruff Key is used to hold a shaft with a mating part, such as a gear. It is 1 inch in length, made of metal, is silver, and is sold individually. If the mating shaft or gear no longer rotates together, you likely need to replace the Woodruff...Read more Key. Inspect it for signs of fatigue or wear, which occurs through regular use, and replace it if needed. You will need a wrench set, an allen key set, a screwdriver, and pliers to complete this repair. Customers rate this repair as Easy.

This filter, also known as a water inlet screen, is designed for use with pressure washers and has a 1-inch diameter (including the surrounding rubber housing). The filter itself is made of mesh and is sold as an individual part that filters dirt and debris from entering your pressure washer. It is recommended that this part is routinely ...Read moreinspected to keep your equipment running smoothly and to prevent a damaged filter from allowing dirt into your equipment. This part sits in-between the hose from your home and the pressure washer itself and is a genuine OEM part that requires no tools to replace or install.

This bottle of oil is OEM and approved by the manufacturer. It is compatible with dozens of models of pressure washers. This one 4.6 oz bottle is the adequate amount of oil needed for the machine. A socket set is required to remove the plug on the oil pump. It is recommended to use a small funnel to pour the oil into the pump to prevent spillage.

This is an original part from Briggs and Stratton and Troy-Bilt pressure washers. The water inlet kit contains the parts needed to replace the water inlet that connects to the garden hose The most common reason for replacing the water inlet kit is if it is cracked or broken. This part is sold individually. The tool that you will need to replace the water inlet kit is an adjustable Wrench.

This item has been OEM sourced to ensure quality. The clear plastic hose is intended to be used with pressure washers from Troy-Bilt and Briggs & Stratton. This part includes the fittings at the ends. The hose is used to carry chemicals or soap from the detergent tank to the pump when using the machine to clean. This item is available as an individual replacement part.

This is available as a kit that contains all the necessary parts. These are OEM Briggs & Stratton and Troy-Bilt parts directly sourced from the manufacturer for use in pressure washers. They are made out of metal. If these items in the chemical injection kit become broken they will need to be replaced and may require a socket set during the installation.

This is an authentic OEM replacement part for use with the pressure washers listed below. It is a quick connect nozzle with a zero (0) degree, straight line spray width. This cutting nozzle is the strongest stationary nozzle and is recommended for use on strong hard surfaces, as it can cause paint removal or scratches. Sold individually.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Troy-Bilt, Briggs and Stratton and Snapper pressure washers. It is an identical replacement for a missing or a faulty pin that helps to secure the components together, please make sure to refer to the appropriate diagrams of your model f...Read moreor the correct location and application of this part. Keep in mind this high-quality pin is made of durable metal and is sold individually.

This is an OEM part sourced directly from the manufacturer. The pump head kit is designed for use in pressure washers from Briggs & Stratton and Troy-Bilt. This part is made of metal, and comes with four bolts for attachment. It is used to direct the flow of water through the machine. You may require a wrench or Allen key when replacing this part.