Models > 0157

0157 Briggs and Stratton Generator - Overview

Models starting with 0157

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Fuel Valve W/Bushing – Part Number: 192980GS
Fuel Valve W/Bushing
★★★★★
★★★★★
(5)
PartSelect #: PS8911051
Manufacturer #: 192980GS
Made of durable rubber and plastic components, this Fuel Valve and Bushing are designed for use in over 150 models of generators and pressure washers. This item is sold as a kit, including the valve a...
$19.31
  In Stock
Cap, Fuel Gauge – Part Number: B4363GS
Cap, Fuel Gauge
★★★★★
★★★★★
(2)
PartSelect #: PS9314364
Manufacturer #: B4363GS
This OEM replacement fuel gauge cap is designed for use in generators. It comes in a cylindrical shape and has a built-in window to easily view the fuel levels without pulling out the entire cap. It i...
$45.30
  In Stock
Breaker, Circuit, 20A – Part Number: 209872GS
Breaker, Circuit, 20A
PartSelect #: PS9919917
Manufacturer #: 209872GS
This circuit breaker is an important safety device found in the control box of your generator. It protects the electrical system from overloads and short circuits by automatically cutting off the elec...
$10.91
  In Stock
Mount, Vibration – Part Number: 21217GS
Mount, Vibration
PartSelect #: PS8922748
Manufacturer #: 21217GS
$7.72
  On Order
Grommet,Tank – Part Number: 83465GS
Grommet,Tank
PartSelect #: PS9307985
Manufacturer #: 83465GS
$5.19
  In Stock
BOTTLE, Oil – Part Number: 100005
BOTTLE, Oil
PartSelect #: PS8817222
Manufacturer #: 100005
$5.71
  In Stock
Gasket-Exhaust – Part Number: 695398
Gasket-Exhaust
PartSelect #: PS9295033
Manufacturer #: 695398
$7.84
  In Stock
Vibe Mount, With Washer – Part Number: 191413GS
Vibe Mount, With Washer
PartSelect #: PS9269044
Manufacturer #: 191413GS
$6.91
  In Stock
Rectifier, Battery Charge – Part Number: 65795GS
Rectifier, Battery Charge
PartSelect #: PS9054741
Manufacturer #: 65795GS
  No Longer Available
Nut, M8 Flange Serrated – Part Number: 67989GS
Nut, M8 Flange Serrated
PartSelect #: PS9293606
Manufacturer #: 67989GS
The manufacturer certified M8 Flange Nut is an 8mm silver, serrated, metal part. It can be installed using a wrench or socket, and is used to secure parts in place and secure the load. If broken or da...
$4.99
  In Stock
Outlet, 120/125V, 15/20A – Part Number: 68759GS
Outlet, 120/125V, 15/20A
PartSelect #: PS9294308
Manufacturer #: 68759GS
$27.56
  Special Order
Bearing – Part Number: 65791GS
Bearing
PartSelect #: PS9293149
Manufacturer #: 65791GS
$35.83
  Special Order
View More
Back to Top

Common Symptoms of models starting with 0157

[Viewing 1 of 1]
Will Not Start
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dry rotted rubber
Put some dish soap on the rubber, push into the tank hole, slip 1x2 into the handle of the tank and over the new part and pry down pushing it into the hole. Took about 2 minutes.
Parts Used:
Fuel Valve W/Bushing
  • James from PICAYUNE, MS
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old valve dripped gas when opened on cold sub zero day
old valve easily pulled out with screwdriver and pliers

install difficult due to 40 degree cold temp and bushing didn't want to squeeze into fuel tank hole

install required lots of liquid soap on bushing, which popped into place by using upward prying pressure from 3"X24" plywood braced into under-shelf of gas tank
Parts Used:
Fuel Valve W/Bushing
  • Alan from RADFORD, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
major gas leak on my generator
popped out the old-----the bushing failed. replaced as per the included instructions
Parts Used:
Fuel Valve W/Bushing
  • John from LEES SUMMIT, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
5 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top