My Orders
0142 - Overview
Models starting with 0142
Click on the best match to narrow your results.
- 01420-0 Briggs and Stratton Pressure Washer (Briggs & Stratton Pressure Washer Model 01420-0 (014200, 01420 0) Parts)
- 014209R (Type 1) Stanley Garage and Workshop (Professional Organizer)
- 01421-0 Briggs and Stratton Pressure Washer (Briggs & Stratton Pressure Washer Model 01421-0 (014210, 01421 0) Parts)
- 01421-1 Briggs and Stratton Pressure Washer (Briggs & Stratton Pressure Washer Model 01421-1 (014211, 01421 1) Parts)
- 014266R (Type 1) Stanley Garage and Workshop (St Tool Organizer Xl)
- 01429-0 Briggs and Stratton Pressure Washer (Briggs & Stratton Pressure Washer Model 01429-0 (014290, 01429 0) Parts)
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$27.33
In Stock
Fuel Valve With Bushing
Part #192980GS
Made of durable rubber and plastic components, this Fuel Valve and Bushing are designed for use in over 150 models of generators and pressure washers. This item is sold as a kit, including the valve and the rubber cap. Its primary purpose is to deliver fuel from the tank to the carburetor.
This part is found on the underside of the fuel...Read more tank and should be replaced when it is worn or damaged. When malfunctioning, it may cause your engine to be starved of fuel and run rough or not at all. You will need a screwdriver and pliers to complete this repair.
Customers rate this repair as Easy.
Read less
$35.15
In Stock
Chemical Injection Kit
Part #192914GS
Used to connect the hose that supplies the chemical cleaning solution (soap), this OEM replacement Chemical Injection Kit consists of the brass fittings, a metal ball, a spring, and a rubber seal, and is an exact replacement for various pressure washers.
If the cleaning solution will not dispense, it is possible that you need a new Chemi...Read morecal Injection Kit. Inspect it for signs of wear or damage and replace it if needed. This part is known to wear over time. You will need a wrench set to complete this repair.
Customers rate this repair as Easy.
Read less
$22.62
In Stock
Thermal Relief Valve
Part #208673GS
Sourced directly from the manufacturer, this part is used to open and release hot water if the water exceeds the maximum operating temperature. It has metal and plastic components, is not part of a kit or assembly, and is sold individually.
When malfunctioning, the Thermo Relief Valve will open on a regular basis, which can cause damage ...Read moreto your pump. If it is opening often or on a regular basis, replace it to protect your pump from damage. You will need a socket set, a wrench set, and pliers to complete this repair.
Customers rate this repair as Easy.
Read less
$6.57
On Order
Garden Hose Filter
Part #B2384GS
This filter, also known as a water inlet screen, is designed for use with pressure washers and has a 1-inch diameter (including the surrounding rubber housing). The filter itself is made of mesh and is sold as an individual part that filters dirt and debris from entering your pressure washer. It is recommended that this part is routinely ...Read moreinspected to keep your equipment running smoothly and to prevent a damaged filter from allowing dirt into your equipment. This part sits in-between the hose from your home and the pressure washer itself and is a genuine OEM part that requires no tools to replace or install.
Read less
$67.03
Special Order
Hose
Part #708962
This replacement hose is a genuine OEM sourced item that specially produced for use with Craftsman pressure washers. This 25 ft. high-pressure hose is made of durable rubber with metal fittings and it is sold individually. It can be used on pumps that produce up to 2600 PSI. Over time the material may deteriorate or get damaged eventually requiring replacement to maintain a working unit.
$6.40
On Order
Washer, 5/16
Part #703350
This flat washer is an OEM part that is silver in color, made of metal, and its job in your equipment is to spread load and pressure under a bolt. It can have multiple uses depending on your equipment, and can be used in a lot of different equipment, so be sure to consult your owners manual or check your part number to ensure this fits yo...Read moreur model. Over time the washer may become damaged; watch for cupping from over-tightening as a leading cause.
This is a very easy part to repair and does not require any tools.
Read less
$9.62
On Order
Inlet Needle, Seat, And Clip Assembly
Part #631021B
$6.40
In Stock
Grommet
Part #30809GS
This replacement part is used on the base of various models of pressure washers to reduce vibration from the pump. This Grommet has an O.D. of 1 inch, is not part of a kit or assembly, is sold individually, and is made of durable black rubber.
This part is known to wear with regular use of your machine, it should be replaced if you noti...Read moreced more vibrations than normal within the unit.
Customers rate this repair as Easy.
Read less
$55.07
In Stock
Kit, Unloader
Part #187879GS
This is an original replacement part sourced directly from the manufacturer. The unloader kit is commonly found in pressure washers from Briggs & Stratton. This part includes a plug made of high-quality plastic, a metal valve and spring, and two flexible rubber O-rings. You may require a wrench when replacing these parts.
$10.39
In Stock
18oz 30w 4 Cycle Oil
Part #100005
This bottle of oil can be used in over 150 different types of machinery. It is most commonly used for pressure washers and generators from manufacturers such as Briggs and Stratton and Troy-Bilt. This detergent oil is warranty approved and specially compounded for warm weather use. Please note: it is important to avoid over filling your engine with oil.
$6.40
On Order
Clip, Tree
Part #B1797GS
$10.03
In Stock
Engine Fuel Fitting
Part #631807
This is an original replacement part manufactured for use with small engines. This special fuel fitting is used to connect the fuel line to the carburetor. Overtime old fuel can clog passageways within the carburetor and may require the carburetor to be rebuilt. This fuel fitting is sold as an individual replacement part, please see model diagram for associative parts.
Common Symptoms of models starting with 0142
How this model fails, and the parts that fix it.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More