My Orders
0141 - Overview
Models starting with 0141
Click on the best match to narrow your results.
- 0141 (SER 479-5700) Milwaukee Electric Drill (Electric Drill / Driver)
- 0141 (SER 479-1001) Milwaukee Electric Drill (Electric Drill / Driver)
- 0141 (SER 479-9200) Milwaukee Electric Drill (Electric Drill / Driver)
- 0141-1 (SER 708A-15500) Milwaukee Electric Drill (Electric Drill / Driver)
- 0141-1 (SER 708B) Milwaukee Electric Drill (Electric Drill / Driver)
- 0141-1 (SER 708-15500) Milwaukee Electric Drill (Electric Drill / Driver)
- 0141-1 (SER 708D) Milwaukee Electric Drill (Electric Drill / Driver)
- 0141-1 (SER 708C) Milwaukee Electric Drill (Electric Drill / Driver)
- 0141-1 (SER 708-11574) Milwaukee Electric Drill (Electric Drill / Driver)
- 0141-1 (SER 708-5701) Milwaukee Electric Drill (Electric Drill / Driver)
- 0141-1 (SER 708-1001) Milwaukee Electric Drill (Electric Drill / Driver)
- 01415-0 Briggs and Stratton Generator (Briggs & Stratton Generator Model 01415-0 (014150, 01415 0) Parts)
- 014166R (Type 1) Stanley Garage and Workshop (St Double Sided Organizer)
- 01417-0 Briggs and Stratton Pressure Washer (Briggs & Stratton Pressure Washer Model 01417-0 (014170, 01417 0) Parts)
- 01417-1 Briggs and Stratton Pressure Washer (Briggs & Stratton Pressure Washer Model 01417-1 (014171, 01417 1) Parts)
- 01418-0 Briggs and Stratton Pressure Washer (Briggs & Stratton Pressure Washer Model 01418-0 (014180, 01418 0) Parts)
- 01418-1 Briggs and Stratton Pressure Washer (Briggs & Stratton Pressure Washer Model 01418-1 (014181, 01418 1) Parts)
- 01418-2 Briggs and Stratton Pressure Washer (Briggs & Stratton Pressure Washer Model 01418-2 (014182, 01418 2) Parts)
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$27.33
In Stock
Fuel Valve With Bushing
Part #192980GS
Made of durable rubber and plastic components, this Fuel Valve and Bushing are designed for use in over 150 models of generators and pressure washers. This item is sold as a kit, including the valve and the rubber cap. Its primary purpose is to deliver fuel from the tank to the carburetor.
This part is found on the underside of the fuel...Read more tank and should be replaced when it is worn or damaged. When malfunctioning, it may cause your engine to be starved of fuel and run rough or not at all. You will need a screwdriver and pliers to complete this repair.
Customers rate this repair as Easy.
Read less
$35.15
In Stock
Chemical Injection Kit
Part #192914GS
Used to connect the hose that supplies the chemical cleaning solution (soap), this OEM replacement Chemical Injection Kit consists of the brass fittings, a metal ball, a spring, and a rubber seal, and is an exact replacement for various pressure washers.
If the cleaning solution will not dispense, it is possible that you need a new Chemi...Read morecal Injection Kit. Inspect it for signs of wear or damage and replace it if needed. This part is known to wear over time. You will need a wrench set to complete this repair.
Customers rate this repair as Easy.
Read less
$15.46
In Stock
Breaker, Circuit, 20a
Part #209872GS
This circuit breaker is an important safety device found in the control box of your generator. It protects the electrical system from overloads and short circuits by automatically cutting off the electricity flow when it detects excessive current. It can handle a maximum current of 20 amps. You can tell if a circuit breaker is broken by c...Read morehecking for visible signs of damage, such as an unresponsive button, cracks, or burnt marks. If the circuit breaker repeatedly trips, the breaker may be faulty or overloaded. You will need a screwdriver, a set of pliers, a socket set, and a nutdriver to replace the breaker in your generator. Follow the instructions in your user manual to access the control box. You typically need to remove the carburetor and the fuel tank before removing the cover of the control box. Please note that this OEM replacement part is sold individually.
Read less
$6.57
On Order
Garden Hose Filter
Part #B2384GS
This filter, also known as a water inlet screen, is designed for use with pressure washers and has a 1-inch diameter (including the surrounding rubber housing). The filter itself is made of mesh and is sold as an individual part that filters dirt and debris from entering your pressure washer. It is recommended that this part is routinely ...Read moreinspected to keep your equipment running smoothly and to prevent a damaged filter from allowing dirt into your equipment. This part sits in-between the hose from your home and the pressure washer itself and is a genuine OEM part that requires no tools to replace or install.
Read less
$6.40
On Order
Washer, 5/16
Part #703350
This flat washer is an OEM part that is silver in color, made of metal, and its job in your equipment is to spread load and pressure under a bolt. It can have multiple uses depending on your equipment, and can be used in a lot of different equipment, so be sure to consult your owners manual or check your part number to ensure this fits yo...Read moreur model. Over time the washer may become damaged; watch for cupping from over-tightening as a leading cause.
This is a very easy part to repair and does not require any tools.
Read less
$10.83
In Stock
Mount, Vibration
Part #21217GS
This is a genuine replacement part that has been sourced from the original manufacturer to be used with generators and pressure washers from Briggs & Stratton and Snapper. The vibration mount fits between the engine and the frame assembly and is used to reduce vibration between the motor and frame. This item is sold as an individual replacement part.
$6.40
In Stock
Grommet,tank
Part #83465GS
This is an authentic OEM part from Briggs and Stratton and Snapper for use with Generators. The fuel tank mounting grommet forms a cushion between the fuel tank and the fuel tank mounting bolts. The most common reasons for replacing the grommet is if the fuel is leaking from the fuel tank, the fuel lines are loose at the tank or the rubbe...Read morer grommet is cracked and not sealing. This part is made out of rubber and is sold individually. Here is a list of tools that are needed to replace the grommet a receptacle for draining fuel, a wire hook (to retrieve fuel lines), screwdriver, wire cutters or scissors.
Read less
$6.40
In Stock
Grommet
Part #30809GS
This replacement part is used on the base of various models of pressure washers to reduce vibration from the pump. This Grommet has an O.D. of 1 inch, is not part of a kit or assembly, is sold individually, and is made of durable black rubber.
This part is known to wear with regular use of your machine, it should be replaced if you noti...Read moreced more vibrations than normal within the unit.
Customers rate this repair as Easy.
Read less
$10.39
In Stock
18oz 30w 4 Cycle Oil
Part #100005
This bottle of oil can be used in over 150 different types of machinery. It is most commonly used for pressure washers and generators from manufacturers such as Briggs and Stratton and Troy-Bilt. This detergent oil is warranty approved and specially compounded for warm weather use. Please note: it is important to avoid over filling your engine with oil.
No Longer Available
Battery
Part #193043GS
This is a genuine manufacturer-sourced replacement part which is designed for use with Snapper and Briggs and Stratton portable generators. Over time batteries will become weaker and eventually will not provide enough power to operate the equipment as it was designed. Several factors can cause this, such as improper charging or the way th...Read moree unit is used along with normal deterioration of the battery. Note, this high-quality battery is sold individually. Refer to the owner's manual for the correct application.
Read less
$7.27
On Order
Gasket, Head
Part #A2069GS
This is an authentic Briggs and Stratton replacement part manufactured for use with pressure washers. This gasket forms a seal between the pump head and inlet plate spacer. It is recommended to replace pressure washer gaskets when servicing the pump to ensure a proper seal when reassembling the pump. This head gasket is available as an individual replacement part.
$6.40
In Stock
Lawn Mower Flat Washer
Part #703590
This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.
Exact Part matches for your search term
No Longer Available
Common Symptoms of models starting with 0141
How this model fails, and the parts that fix it.
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More