0128204 Presto Pressure Cooker - Overview

This part comes directly from Presto. The Regulator maintains the proper pressure in many canners and pressure cookers. This part is regulates the pressure to 15lbs per square inch. When the pressure reaches 15lbs the regulator starts to gently rock. This part is made of stainless steel and has a plastic handle. This part should be replac...Read moreed if it no longer sits correctly on the Vent Pipe (part number 01058). No tools are needed to replace this part.

This is a genuine Presto replacement part, it is sold individually. This is a safety feature for Pressure Cookers and Canners. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Overpressure Plug will pop out of the lid releasing the excess pressure in the pot.

This is a genuine Presto replacement part, it is sold individually. The purpose of the 09924 Pressure Cooker Sealing Ring/Overpressure Plug Pack is two-fold. The sealing ring is used to create a seal between the Pressure cooker lid and the pressure cooker pot. In the event if the pressure regulator fails, and to much pressure builds up in...Read more the pot, the Overpressure Plug will pop out of the lid releasing the excess pressure in the pot.

This is an OEM part from Presto. This Cover Lock is used on many models of Presto pressure cookers and canners. The Post is made of steel and the gaskets are made of rubber. This part is used to lock the lid to the pot making it so the lid will not open while under pressure. Another part that is commonly ordered with the Cover Lock is the Pressure Regulator (part number 09978).

This is an original Presto part. This Gasket is used on many models of Presto pressure cookers and caners. This Gasket attaches onto the Lock Post (part number 85610). It is common for this part to ware out overtime and should be replaced on a regular basis to help prevent leaking. This Gasket simply slips onto the end of the Lock post. When replacing this part, it is recommended to clean the sealing surfaces.

It is a genuine replacement part that is specially manufactured by Presto for pressure cookers. This is the handle for the body of the pressure cooker, please note the hardware to secure it and the lid handle are all sold separately. Please note this durable plastic body handle is sold individually.

This is a genuine Presto replacement part designed for use with pressure canners and cookers. This vent pipe is a safety feature, once the pressure is at a certain point the center of this part will pop up. This will not allow you to remove the lid until either the pressure is released by the pressure regulator or the cooker has been taken from the heat source. It is made out of metal and it is sold individually.

This durable plastic handle is a genuine Presto part designed for use with pressure cookers. This handle allows for the appliance to be safely lifted and moved. A screwdriver will be required to complete this replacement. Simply unscrew the current handle from the pot and screw the new one into place. One handle and one screw are included per order.