0126306 Presto Pressure Cooker - Overview

This part comes directly from Presto. The Regulator maintains the proper pressure in many canners and pressure cookers. This part is regulates the pressure to 15lbs per square inch. When the pressure reaches 15lbs the regulator starts to gently rock. This part is made of stainless steel and has a plastic handle. This part should be replac...Read moreed if it no longer sits correctly on the Vent Pipe (part number 01058). No tools are needed to replace this part.

This is a genuine Presto replacement part, it is sold individually. This is a safety feature for Pressure Cookers and Canners. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Overpressure Plug will pop out of the lid releasing the excess pressure in the pot.

This is a genuine Presto replacement part, it is sold individually. The purpose of the 09924 Pressure Cooker Sealing Ring/Overpressure Plug Pack is two-fold. The sealing ring is used to create a seal between the Pressure cooker lid and the pressure cooker pot. In the event if the pressure regulator fails, and to much pressure builds up in...Read more the pot, the Overpressure Plug will pop out of the lid releasing the excess pressure in the pot.

This is an OEM part from Presto. This Cover Lock is used on many models of Presto pressure cookers and canners. The Post is made of steel and the gaskets are made of rubber. This part is used to lock the lid to the pot making it so the lid will not open while under pressure. Another part that is commonly ordered with the Cover Lock is the Pressure Regulator (part number 09978).

It is a genuine manufacturer supplied replacement part which is designed for use with Presto pressure cookers. This is the special handle that is secured to the cover providing a user with a comfortable grip. It is a high-quality component which consists of a durable black plastic handle with the metal hardware to secure it and it is sold individually. Please note the handle for the body is sold separately.

This is an original Presto part. This Gasket is used on many models of Presto pressure cookers and caners. This Gasket attaches onto the Lock Post (part number 85610). It is common for this part to ware out overtime and should be replaced on a regular basis to help prevent leaking. This Gasket simply slips onto the end of the Lock post. When replacing this part, it is recommended to clean the sealing surfaces.

This is an authentic Presto part manufactured for use with pressure cookers. The handle is the smaller handle on the front of the pressure cooker, used to hold while transporting the cooker. A single screw is used to secure the handle, the screw is included. The handle is sold individually, a phillips screwdriver is required to install the handle.

This is a genuine Presto replacement part designed for use with pressure canners and cookers. This vent pipe is a safety feature, once the pressure is at a certain point the center of this part will pop up. This will not allow you to remove the lid until either the pressure is released by the pressure regulator or the cooker has been taken from the heat source. It is made out of metal and it is sold individually.