EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

0126002 Presto Pressure Cooker - Overview

Diagrams for 0126002

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sealing Ring Assembly – Part Number: 09936
$19.30
In Stock
Sealing Ring Assembly
Part #09936
This is a genuine Presto replacement part, it is sold individually. The purpose of the 09936 Pressure Cooker Sealing Ring/Overpressure Plug Pack is two-fold. The sealing ring is used to create a seal between the Pressure cooker lid and the pressure cooker pot. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Overpressure Plug will pop out of the lid releasing the excess pressure in the pot.
Pressure Regulator – Part Number: 09978
$14.15
On Order
Pressure Regulator
Part #09978
This part comes directly from Presto. The Regulator maintains the proper pressure in many canners and pressure cookers. This part is regulates the pressure to 15lbs per square inch. When the pressure reaches 15lbs the regulator starts to gently rock. This part is made of stainless steel and has a plastic handle. This part should be replaced if it no longer sits correctly on the Vent Pipe (part number 01058). No tools are needed to replace this part.
Overpressure Plug – Part Number: 09915
$6.40
On Order
Overpressure Plug
Part #09915
This is a genuine Presto replacement part, it is sold individually. This is a safety feature for Pressure Cookers and Canners. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Overpressure Plug will pop out of the lid releasing the excess pressure in the pot.
Air Vent Cover Lock – Part Number: 85407
$9.33
Special Order
Air Vent Cover Lock
Part #85407
Genuine Presto replacement part, it is sold individually. This is a safety feature for the Presto products listed below. Once the pressure is at a certain point the center of this part will pop up. This will not allow you to remove the lid until either the pressure is released by the pressure regulator or the cooker has been taken from the heat source. This part is also known as a pressure cooker interlock.
Pressure Cooker Cover Handle – Part Number: 85636
$10.30
In Stock
Pressure Cooker Cover Handle
Part #85636
It is a genuine manufacturer supplied replacement part which is designed for use with Presto pressure cookers. This is the special handle that is secured to the cover providing a user with a comfortable grip. It is a high-quality component which consists of a durable black plastic handle with the metal hardware to secure it and it is sold individually. Please note the handle for the body is sold separately.
Gasket For Pressure Cooker Int – Part Number: 85660
$6.40
In Stock
Gasket For Pressure Cooker Int
Part #85660
This is an original Presto part. This Gasket is used on many models of Presto pressure cookers and caners. This Gasket attaches onto the Lock Post (part number 85610). It is common for this part to ware out overtime and should be replaced on a regular basis to help prevent leaking. This Gasket simply slips onto the end of the Lock post. When replacing this part, it is recommended to clean the sealing surfaces.
Pressure Cooker Short Handle – Part Number: 85531
$10.30
On Order
Pressure Cooker Short Handle
Part #85531
This is an authentic Presto part manufactured for use with pressure cookers. The handle is the smaller handle on the front of the pressure cooker, used to hold while transporting the cooker. A single screw is used to secure the handle, the screw is included. The handle is sold individually, a phillips screwdriver is required to install the handle.
Instruction Manual – Part Number: 72727
$6.40
Special Order
Instruction Manual
Part #72727
Cooking Rack For 2 1/2- And 4- – Part Number: 85341
$9.01
In Stock
Cooking Rack For 2 1/2- And 4-
Part #85341
This is an aluminum cooking rack for various pressure cooker models. This cooking rack is designed to elevate and hold food and food items above the surface of the pressure cooker to avoid it sticking and allow the steam within the pressure cooker to circulate and cook it more evenly. If you have lost or broken the cooking rack for your pressure cooker, this cooking rack is compatible with various 2.5 and 4-quart cookers. This cooking rack is an OEM part that is sold individually and measures approximately 7-inches in diameter. If your current cooking rack is rusted, damaged or does not fit/work properly any longer, it needs to be replaced to ensure your food is bacteria-free and cooks properly. To avoid issues with your cooking rack, store and use it correctly, and ensure it is cleaned after each use.
Pressure Cooker Body Handle – Part Number: 85569
No Longer Available
Vent Pipe – Part Number: 85608
$9.97
On Order
Vent Pipe
Part #85608
This is a genuine Presto replacement part designed for use with pressure canners and cookers. This vent pipe is a safety feature, once the pressure is at a certain point the center of this part will pop up. This will not allow you to remove the lid until either the pressure is released by the pressure regulator or the cooker has been taken from the heat source. It is made out of metal and it is sold individually.

Exact Part matches for your search term

Depth con.pedal – Part Number: 0126002
No Longer Available
Depth con.pedal
This part number matches the current model number 0126002
Part #0126002

Watch our pros, then fix it yourself.