01/C17 Presto Canner - Overview

This is a genuine Presto replacement part, it is sold individually. The purpose of the 09905 Pressure Cooker Canner Sealing Ring/Overpressure Safety Plug Pack is two-fold. The sealing ring is used to create a seal between the Pressure cooker lid and the pressure cooker pot. In the event if the pressure regulator fails, and to much pressur...Read moree builds up in the pot, the Overpressure Plug will pop out of the lid releasing the excess pressure in the pot.

This is a genuine Presto replacement part, it is sold individually. This is a safety feature for Pressure Cookers and Canners. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Overpressure Plug will pop out of the lid releasing the excess pressure in the pot.

Genuine Presto replacement part, it is sold individually. This is a safety feature for the Presto products listed below. Once the pressure is at a certain point the center of this part will pop up. This will not allow you to remove the lid until either the pressure is released by the pressure regulator or the cooker has been taken from the heat source. This part is also known as a pressure cooker interlock.

This is a genuine OEM sourced part used on many pressure canning devices. The pressure canner pressure regulator is constructed of high-quality metal, and includes two 5 pound rings and the regulator body. This item manages the pressure amount in the canner. No tools should be required for making the installation. The pressure canner pressure regulator is sold individually.

Genuine Presto replacement part, this item is sold individually. The 85707 Cooking/Canning Rack is placed in the bottom of the Pressure Canners shown below. It is above the bottom of the the pot approximately 1/4-1/2 inch. If it was laying flat on the bottom of the canning pot, the heat from the pot would cause the canning jars to break.

Genuine Presto replacement part, this item is sold individually. This part acts as a seal for the 85407 Air Vent Cover Lock on the Presto Pressure Cookers & Pressure Canners listed below. It is placed above the ring on the inside of the lid for the cooker.

These are pressure canner handles sourced directly from Presto. They are made out of plastic and are sold in a set of two (2). To replace these handles you would need a phillips head screwdriver.

This replacement pressure canner body handle is an authentic OEM item, it is not an aftermarket imitation. It is specially produced for Presto pressure canners. It is the handle for the body, please note that the cover handle is sold separately. This item includes (2) plastic parts of the handle.

This is a genuine Presto replacement part designed for use with pressure canners and cookers. This vent pipe is a safety feature, once the pressure is at a certain point the center of this part will pop up. This will not allow you to remove the lid until either the pressure is released by the pressure regulator or the cooker has been taken from the heat source. It is made out of metal and it is sold individually.

This is a genuine Presto part. This booklet contains information on the proper assembly and usage of the 01/C13 Pressure Canner as well as a set of recipes that can be made with the appliance. It is an identical replacement for a missing or damaged book that originally came with a new unit. This item is sold individually.