007314W Waring Blender - Overview

Waring Pro has manufactured this Coupling for many models of blenders. This Coupling is used to drive the blades in the blender jar. To remove this part you will need to hold the blade in place and turn the coupling counter clockwise. The flat side of the coupling needs to install facing the bearing. The Coupling can also be purchased included in the Blending Assembly (part number 007314W).

This is a genuine manufacturer sourced replacement part used on Waring blenders. It helps to distribute the pressure evenly and provides a tight seal for the bearing holder. It is installed along with other seals and washers underneath the cutter assembly, to prevent leaks from coming out of the bottom of the container. Over time these se...Read moreals and washers will become brittle and compressed, then will have to be replaced. For proper application please refer to diagrams of your unit. This part is made out of rubber material and it is sold individually. To complete this repair you will need a wrench.

Genuine Waring replacement part, this item is sold individually. This part acts as a seal for the blenders shown below. It is installed along with other seals and washers underneath the cutter assembly, to prevent leaks from coming out of the bottom of the container. Over time these seals and washers will become brittle and compressed, then will have to be replaced.

This is an authentic replacement part sourced from the original manufacturer for use with blenders made by Waring. The user will need to replace this part if it is missing. Unfortunately, over time it may wear out. This washer is made of metal and sold individually.

This is an authentic manufacturer-sourced component which is made for use on Waring blenders. It provides an identical replacement for a damaged or a missing washer that was installed on a new unit. Over time the part can get damaged or lost eventually requiring a replacement. It is made of high-quality metal and is sold as an individual ...Read moreitem. Refer to the appropriate diagram for your model to ensure the correct repair procedure.

This is an authentic part that is supplied directly from the original equipment manufacturer for Waring blenders. The blade rotates on the drive shaft at a high speed, to cut the contents of the blender. This part is made of metal and is sold individually. This is also a common wear item, so we recommend ordering a spare. Be sure to wear work gloves and handle this part carefully while installing.

It is an identical replacement for a damaged or a missing drive shaft that was installed on a new unit. Keep in mind this high-quality component is made of durable metal and is sold individually. Refer to the owner's manual and the parts diagrams for your model to ensure the correct repair procedure. It is a genuine item that is supplied by the original manufacturer for use with Waring blenders.

An authentic manufacturer-sourced replacement part which is specially designed for use with Waring blenders. This is one of the washers for the blade and the jar assembly, for correct location please make sure to check appropriate diagrams for correct location and use of this item. It is a high-quality component which is made of durable metal and it is sold individually.

This is a genuine item that is supplied by the original equipment manufacturer for use with Waring blenders. It is an identical replacement for a missing or a faulty bearing holder that helps to secure the blending assembly, please make sure to check the diagrams of your model for the correct location and application of this hardware. Kee...Read morep in mind this high-quality item is made of durable metal and is sold individually.

It is a genuine OEM supplied replacement hardware that is specially produced for Waring blenders. This is the hex nut that is secured on the bottom of the blender jar. Please note one durable metal item is included per order.

This is a Genuine OEM sourced replacement part designed for use with Waring Blenders. This is the Blade that cuts food inside the container. It is made out of Metal and it is Sold Individually. To replace it you would need a Wrench or Pliers. • First you want to remove the Nut that secures the old blade assembly • Remove the cutte...Read morer assembly and make sure to clean the gaskets • Secure the new blade assembly using the Nut