Hard starting, rough running, or a weak spark may mean the engine plug needs replacement. Designed for select gas powered generators and pressure washers, the copper core plug helps ignite the fuel and air mixture. Check the correct plug gap in the equipment manual before installation. Work only on a cool engine. Use the exact model number to confirm fit.
This part is an OEM from Generac for use with Pressure Washers and Generators. The ignition coil attaches on the side of the flywheel and produces the electrical charge to the spark plug. The most common reason for replacing the ignition coil is if the engine won't start and the coil proves to be at fault. This part is sold individually. ...Read moreThe tools that you will need to replace the ignition coil is a flat-head screwdriver, nut driver and a socket wrench.
This is a genuine replacement part sourced from the Generac manufacturer. The assy, recoil starter 212CC is compatible with some small engines. This item is constructed of intricate metal parts and cording within a durable, plastic casing. The assembly allows the user to start the engine. Please refer to the specific manual and diagrams f...Read moreor repair information. This part is sold individually. A screwdriver may be helpful in making the replacement.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
No spark. rotted high tension spark plug wire
1 personfound this instruction helpful.
Stanton from PHILPOT, KY
A Bit Difficult
1- 2 hours
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Removed the machines face plate by drilling out the push pins, removed the air filter assembly. removed throttle linkage, removed anchors of the spark wire from motor housing, removed the recoil start assembly. removed the bolts holding the coil assembly. installed the new coil assembly and placed business card between the coil and the ma
... Read moregnetic section of the flywheel to secure the proper gap.
Reverse the process and reinstall all the assemblies noted above. I took pictures with my cellphone to ensure that the throttle linkage was properly re-installed.